Search: straight tongue trailer coupler   >   Straight Tongue Trailer Coupler   >  

You can convert surge brakes to an electric over hydraulic braking system. To do this, you will need an electric over hydraulic actuator and a brake controller. For an electric over hydraulic actuator, I recommend looking at the Carlisle HydraStar…

Yes, the DeeMaxx Disc Brake Kit #DE66YR will allow you to use 14" trailer wheels.

Hi Ed, If I'm understanding you correctly your trailer's frame is 3" wide and the coupler needs to have a 2" ball. If so the Demco Channel Tongue Trailer Coupler #DM15000-52 you were looking at would be a compatible fit. I've…

The channel of the Demco 21K #DM16080-52 coupler is 3 inches deep. The distance from the center of where the trailer ball would sit to the first 5/8 inch hole is 7 inches, and 12 inches to the second hole. The Titan #T4853100 dimensions are a little…

Choosing the correct Timbren Axle-Less system will depend on a few things. First will be the weight capacity needed. Going off the 1,000 pound load you could be going up to, I am going to suggest a 2,000 pound set up. That being said, these do have…

Kyle, a direct replacement jack, no unfortunately. We do have plenty of other alternatives that you might be interested in though. For instance, take a look at the Ark Xtreme Off-Road Swivel Trailer Jack w/ 2 Wheel #ORJW350D. This jack bolts around…

It is possible to make your 2013 Chevy 3500 compatible with a trailer with electric over hydraulic brakes. It is a common issue for the Chevy OEM brake controllers to have problems with EOH brakes. You are right that there is no way to reprogram the…

As the Buyers Products Straight Tongue Trailer Coupler #3370091560 has 3 holes per side on the part that will bolt to the tongue of the trailer, you will want to use 3 bolts per side, so 6 total. This is kind of a standard, so when there are 2 holes…

Because Buyer's Products considers the build sheets and CAD drawings to be proprietary information, they won't provide copies of that. This being said, I pulled one of the #3370091560 Buyers Products couplers from stock and and measured the…

In regards to the Buyers Products Straight Tongue Trailer Coupler part #3370091560, the overall length is 17".

Hi Tom, I've attached the wiring diagram for the Hydrastar Electric Over Hydraulic Actuator Kit for Disc Brakes #HBA16-252-82 below as well as a video I made where I'll walk you through the installation process.

I spoke to my contact at Titan and he informed me that there really isn't a simple way to lock out the sliding portion of the Model 10 actuators. You would have to either weld the two portions of the actuator together or drill holes through them…