Result: stl79rb

A pin with a 1/4 inch diameter, like part #e98886, is standard for coupler locks. Unfortunately there are none that are 1/16 of an inch larger in diameter. If instead you meant that you needed one with a span of 5/8 of an inch then you will want to…

The correct replacement brake assemblies for your B44EA-22 is the part #AKEBRK-35-SA which is for a 3,500 lb axle and is self adjusting. Then for a matching hub/drum that has a 6 bolt pattern on it you'd need the #AKHD-655-35-K and you'd be…

Tom, unfortunately the controller 2020003067 is not going to work in place of the 289252, so It would need to be replaced with the 289252. I have also confirmed this with Lippert to make sure.

The bolt pattern of the Dexter Hydraulic Drum Brake Assembly #23-402-403 that you referenced is is 4.92 inch by 4.92 inch and the diameter of the bolt holes are .545 of an inch.

The Bargman 7-Way, RV-Style Connector #WG54006-043 referenced in your question uses the standard RV-style pin locations for its 7-Way connector. I have attached a diagram of these locations and their functions for you to check out. Wire colors will…

I might have some options for you but I wasn't able to reference the TDE Turbo Lube 48395 Oil Cap. Therefore, in order to find a replacement for this you'll need to measure the outer diameter of the threaded portion on the oil cap. The Oil…

I spoke to my contact at Dexter Axle, they told me the Dexter Axle Torflex #10 Axle Side-Mount Frame Installation Hardware Kit #DX54FR is made of steel. They also said that there is not an aluminum alternative.

I spoke with the manufacturer and they recommend using 160 ft-lb for the torque spec on a 3/4 inch U-bolt #11-70.

Hey Randy. We offer wide variety of U-bolts, but unfortunately we do not offer anything quite that large. Our biggest u-bolt is Item #11-70 which is 9-5/8" long and has an inner width of 5". The bolt diameter is 3/4" so the center to…

Trailer fenders are classified by the diameter of the trailer wheels they're compatible with. For instance, the #F008583 fender you referenced works with 13 inch diameter wheels. If you're unsure of the diameter of your wheels, the last two…

What I recommend to keep someone from stealing your parked trailer is a wheel lock such as #RA-25 or a model that also covers the lug nuts such as #WI490. Usually the mere presence of a lock will cause a would-be thief to move on to another target.…

The length of a fender is measured from the longest point, at the very bottom of each end across. Then the height is measured from the tallest point, right in the center. For example, the CE Smith Single Axle Trailer Fender #CE17720 is 22-1/2"…