Search: spare tire carrier under frame   >  

The slight gap you see is normal. The drum is not supposed to make contact with the brake mounting plate. There are some instances when mixing brands of brakes, hubs, and axles, that won't line up properly but in this case it is normal. I…

Thanks for the photo! In order to replace the surge brake actuator, I recommend taking a look at the Titan Zinc-Plated Brake Actuator part #T43397007K. This actuator is zinc plated for corrosion resistance, will work with 1-7/8"/ 2"…

The correct wheel stud for a Dexter 7K Axle with 1/2" Wheel Studs is the Dexter Wheel Bolt part #7-262 which is cross-compatible with the AL-KO 1530093.

A single spare tire mounted in your trailer will not have too much effect on tongue weight but if your application means installing multiple E-Track spare tire holders #RA-16HST then you will want to try to distribute the load evenly if possible.…

The crank handle for the Lippert Components Spare Tire Winch with Offset Cable item #LC159056, is Replacement Crank Extension for Lippert Spare Tire Winch Assemblies - 35-1/2" item #LC1315411. The Spare Tire Winch item #LC159056 has a…

The MORryde Alltrek 4000 kits offer the best cushioning so if you are wanting to improve the ride quality of your 2011 Stellar Eclipse that would be the route I would go with. If the wheelbase is 35 inches between the axles you would want the part…

Yes, the locks will be keyed alike. The Trimax 2-Pack item #TMX63FR or Trimax 3-Pack item #TMX73FR will ship with all locks inside the package keyed alike. The reason it says keyed unique on top of the product page is because you can not buy multiple…

You would not be able to charge your battery through the wiring on your 4-way trailer connector. Since your truck has a 7-way connector, you could maintain the power to the battery but not charge it. To begin, you would need to cut off your 4-way…

The MORryde RV Cargo Sliding Tray - 72" x 20" #MR64FR is a 1-way slide out tray that will extend out 60%. It will fit in RV cargo compartments that are at least 72" deep and has a weight capacity of 800 lbs. This tray will allow you to…

I spoke to a contact at MORryde and the gave me these dimensions: External 70.36" L x 19.74" W Internal 70.21" L x 16.85" W Your Electric cooler will not fit inside the slide with those dimensions. The height from the flooring…

The Lippert Underchassis Double Bin Storage Unit #LC125460 does not have a specific trailer or RV fit list. You have to go by the dimensions of the unit. This one is 99-1/2" long x 19-1/8" wide x 8-1/4" tall. One thing you want to…

I recommend the Redarc Tow-Pro Elite Brake Controller for Tekonsha Harness item #RED63RR. This brake controller and harness will install inside your Silverado without cutting or splicing wires using the Tekonsha Plug-In Wiring Adapter item #3064-P.…