Result: spare tire cargo carrier

We do offer some trailer covers which are meant to keep cargo inside the trailer. You would want to go with the Erickson Mesh Tarp and Truck Bed Cover #EM57057 which measures 8' x 10'. Keep in mind that this cover is made of mesh and should…

For your 6x12 V-Nosed trailer, we have the Adco SFS AquaShed Cover for Bumper Pull Trailer #290-46002. This cover will fit trailers 10'1" to 12' long, 106" wide, and 94" tall. Additionally, this cover works best in short term…

The best option we have to cover the 6x12 V-nose Arising Industries Cargo Trailer is Adco SFS AquaShed Cover for Bumper Pull Trailer part #290-46002 which fits trailers 10'1" - 12' long not including the trailer tongue. The Adco is your…

The Adco SFS AquaShed Cover #290-46002 is exactly what you're needing for your 10' cargo trailer. Attached is a review video for you to check out. On shorter trailers this can be stretched over the tongue, but it should fit right over the box…

Though there isn't anything specifically for a 6 x 10 v-nose enclosed trailer, we have something that may work for you. Since the v-nose extends the length somewhat, a cover for a bumper-pull horse trailer up to 12 feet could work, depending on…

To secure your vehicle on the wood deck of your 8 X 18-foot car hauler trailer I suggest you consider straps rather than chains. Straps offer lighter weight, reduced chance for scratching the vehicle and are often easier to use than chains. They also…

You can attach D-Ring Tie Downs most anywhere on a trailer. You need to select the location based upon what you need to tie-down. When possible, it would be best to drill through metal to install the rings. You can mount them to the wood planks, but…

I may have a solution for you, however the only standard spare tire carriers we have available for your trailer wheel with a 5 on 5 inch bolt pattern are U-bolt designs like the CE Smith #CE22007Z-11050-2. Another option I recommend looking at is a…

I checked with Fulton and the U-bolt part #FETC0101 that you referenced has an inner length of 9-1/8 inches and an inner width of 3-5/8 inches.

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Well James, I can say with 100% certainty that what you are seeing and experiencing is NOT normal. However, this is not the first time we have heard of this occurring. To answer your first question, it was corrosion that caused it. To be more…

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…