Search: scissor jack camper jacks   >  

I'm sorry I really have no way of knowing what slide-out motor is on any specific travel trailer. I would need a part number (which is generally on the motor itself) to try and find a reference for it.

The Ark Drop Down Corner RV Stabilizer Jacks #ARK94FR are able to lock into place at 30 and 60 degrees as stabilizers. They also have the 90 degree position where it is rated for 1,929 lbs and then the stored position.

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

The MORryde Suspension Upgrade Kit #MR26ZR is designed to be used with the MORryde Rubber Equalizers for Triple Axle Trailers #MR39ZR. This equalizer kit only requires 6 sets of shackles as it removes one set of the shackles and allows the leaf…

Some movement is normal. This is because there are two pivot points, one at the second hanger and one at the third hanger which are on either side of the center axle. What you will want to do is check several things to determine if there is wear…

I have no doubts the Scissor Stabilizer Jack #TJSC-24 will work as a perfect replacement for the scissor stabilizer jacks on your 2017 Flagstaff T12RBST camper trailer because it has a large 10" x 3-1/4" mounting base with…

Since your driveway is on an incline the trailer will have to have the wheels chocked so it can't roll. Or it will have to be coupled to a tow vehicle while it is parked. It is hard to beat a good rubber chock such as #337WC1467A sold in…

I recommend the BF Goodrich Commercial T/A tire LT235/75/R15/C as it will fit on a 15 x 6 wheel. These are typically traction tires and wouldn't be the best option for a travel trailer. The width of this BF Goodrich tire is 9.2 inches and 28.6…

I reached out to my contact at Demco who was able to supply me with the attached dimensional photo of the Demco A-Frame Trailer Coupler #DM14793-95.

I recommend the Leveling Scissor Jack Set #JSC-30 for your Echo UTV Trailer. These have a maximum height of 30" and a maximum stabilization weight rating of 10,000lbs per jack. They can also be mounted to your trailer by using bolts or welding…

I have attached for you below a photo with the dimensions of the weld-on plate for the Ark Drop Down Corner RV Stabilizer Jack Kit part #ARK94FR. The plates are 117mm long x 72.50mm wide or 4.6" long x 2.8" wide.

I contacted the manufacturer about the lengths for these stabilizer jacks and have included the information they were able to provide me. The Ark Drop Down Corner RV Stabilizer Jacks #ARK34FR are 422 mm (16.6") collapsed and 600mm (23.6")…