Search: safety chain hook   >  

Electric tongue jacks like the Electric Jack w/ Footplate - A-Frame - 25-1/8" Lift - 3.5K - Black #EJ-3520-BBX are designed to use a 12v power so if you want constant power I recommend using a trailer battery for connection. If you only want…

Yes, the Replacement Master Cylinder for Demco Actuators #5672 will work fine with your 2016 Demco AT6000P car hauler since it utilizes a Demco actuator. Additionally, this master cylinder is made in the United States and has an overall measurement…

Yes, there are replacement master cylinders for surge brake actuators like the Demco Actuator part #DM8203102 that you referenced. If this was the actuator that you have you would want the Replacement Master Cylinder #5672. If you have a different…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

It is absolutely more cost effective to replace entire assemblies instead of brake pads. It's an easier install, the price is about the same, you don't have to be as specific when picking out the replacement parts, and you get all new braking…

The hub/drum you sent in a picture of is a Lippert 8,000 lb axle hub with an 8 on 6-1/2 inch bolt pattern designed for oil-bath applications. The correct replacement then is the #8-285-10UC3-A.

I went out to our warehouse to take a couple measurements on the B&W Tow & Stow 2-Ball Mount #BWTS10033B that will let you determine if there will be any interference between the unit when it's in the stored position and the…

I recommend going with the Thin Line LED Trailer Light, #MCL65AB for amber lights and #MCL65RB for red lights. These sealed, dual-bulb lights can be used as a clearance or side marker lights. I have included a link to a video review and installation…

I checked with my contact at Ventline and for your PR-8 100-CFM range hood the correct replacement motor is the part #BVD0278-00. Then for the fan blade you will need part #BCD0409-00.

The correct torque for installing lug nuts on your 5 X 8 trailer's 5-lug wheels will depend on the size of the lugs. For a 1/2-inch lug the torque spec ranges from 75- to 85-ft-lbs. For a 9/16-inch lug the torque spec ranges from 135- to…

Hopkins offers a flex cable, part #HM47053 that sounds exactly like what you need. On one end, it has the 7-way plug that's compatible with your RV, and a 6-way plug on the other that would plug into your towed vehicle. I'll link you to some…

To really be able to get you what you need we are going to require a bit more info on what you're needing. We do have something like the Valterra Replacement Window Frame for RV Entry Doors #A77012 that could work if your current trim is 15…