Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The Road Armor Shock Absorbing Equalizer Kit part #LC696740 are taller than most other standard equalizers so you'll likely need the longer 3-1/8" shackle straps when using them, the Lippert AP Kit part #LC52SV is a go-to for this as it has…
view full answer...If the B&W Companion Slider #BWRVK3400 has been sitting for a while or it's just been harder to slide then clean the rails and apply some white lithium grease like part #L11354. If you are still having trouble sliding the hitch locate the 4…
view full answer...No, the slider on the B&W Companion Slider Gooseneck-to-5th-Wheel Trailer Hitch Adapter part #BWRVK3400 does not need to be lubed. The saddle, jaws, polyurethane bushings, and coupler surface are the only components that need to be lubed…
view full answer...You can fit the #C31083 on your 2023 Ford F-150 with the FX4 package but you will need to make modifications. The skid plate can be reinstalled but it will have to be trimmed to get it to fit. Technically the auto air damn can also be modified to…
view full answer...Since your trailer weighs a total of 10,400 lbs the Pro Series Square Jack #PS1400950376 that you referenced would work well since it has a lifting capacity of 10,000 lbs. Since the jack does not lift the entire weight of the trailer this would be…
view full answer...The #99 trailer spindle is typically found on 9,000 lb and 10,000 lb axles. This is not a spindle that we carry at this time, but I did find some of the measurements. I have attached a diagram showing the dimensions of a #99 spindle for you to check…
view full answer...I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but they…
view full answer...Since time is a factor and we do not have the complete axle brake and hub set up, Item #8327816-EB, in stock (August 2021). I recommend the Dexter Trailer Axle with E-Z Lube Spindles item #8327816. This axle is 86-1/2" Long with a 5,200 lbs…
view full answer...You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…
view full answer...Yes, you are correct. The Dexter Nev-R-Adjust Electric Trailer Brakes item #K23-478-479 are exactly what you need for AL-KO 4,400 lbs axles.
view full answer...You are correct that the Camco Cam Lock #CAM44303 does not include a rubber gasket or star washer. These components are not available separately for this particular lock. For a 7/8" cam lock assembly that does include these components I instead…
view full answer...Related Searches
Filter Your Search
Contact and Help