Search: rv covers   >   RV Covers   >  

Hey Doug, That's a good question because fit is really important so the cover stays snug on your trailer, and there is a specific way to measure for the etrailer covers. It's pretty simple, and what you want to do is measure the body of the…

Hi Doug; the best cover for your Keystone Cougar is the Adco SFS AquaShed #290-52244. This is confirmed to fit your trailer model and specifically designed to handle rain and snow. It has built-in vents to prevent mold and mildew buildup and zippered…

Hey Liz! I checked online and it looks like the box of your 2023 Lance 2285 Travel Trailer measures 22-1/2' long x 8' wide. The best cover for your trailer is going to be the Adco Olefin HD RV Cover for Travel Trailers up to 24' item…

Hello again Joe; the etrailer RV Cover for Travel Trailers #e97VV does have zippers to allow access with the cover on which can be seen in the video attached below. This will work as long as you measured correctly. You need to measure the body of the…

Christina, when you go to use the Mighty Cord SurgeMinder #SU99SR it's going to do a check first to make sure it's a safe circuit, then you can connect your RV.

Hello Dennis; the SnapRing TireSavers RV Tire Covers #ST7000WH fit 24" - 26" diameter tires. Your typical 205/75R14 tire is 26" in diameter. However, there is some variation in there depending on the brand and the tread. I would…

The length I'm seeing for a 2024 Grand Design Imagine XLS 17MKE is 21' 11" so if you subtracted 3' for the trailer tongue you'd be right at 18' 11" and would fall within the Adco AquaShed #290-52240's fitment.…

Hey Shawn, So the length you mentioned should include the tongue, and since a cover doesn't go over the tongue you'll subtract three feet from that for a 22'5" measurement. That said, there are a pair of options for covers that fit:…

Hey Mark, thanks for reaching out! Yes, just the hardware from the Replacement Standard Dual Rack Repair Kit #LC26VR is available as part #LC83BX on our site.

You are going to want either our Bearing Kit #BK2-100 or the Timken Kit #TMK52VR. Both of these kits will give you the inner/outer bearings and races along with a grease seal and cotter pin/D-washer for one hub. You always want to replace the race…

We have just what you're looking for. The Manual-to-Electric Conversion Kit for HappiJac Truck Camper Jack Systems #LC733960-182524 is compatible with your HappiJac 4160 Series jacks and will allow you to convert your system from manual to…

For your 15 foot long camper we have the Adco RV Cover part #290-52238 which is designed for campers that are between 15-18 feet like yours so this would be a great choice. It's also 90 inches tall which would be right at what you'd need…