Result: roof basket

Tyler, you should be fine, but it wouldn't hurt to find out what bars you have so you can double check the weight ratings. These roof baskets, like the Curt Roof Mounted Cargo Basket #C18115-117 are designed to fit most standard and aftermarket…

Hey Mike there should be a grommet under the spare tire that you can route the Curt Wiring Harness item #C56040 through. This was there on the previous models and we've had customers do what you're wanting successfully. You can use the Curt…

Since the Malone Microsport trailer part #MPG460G has a tongue width of 2 inches you could use the tower kit part #CE31013G which is 30 inches tall as this is designed to fit 2 inch channels. Then you could use a winch like the Buyers Products part…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Yes the Replacement Clamp Assembly for Yakima SlimShady Roll-Out Awning part #8880737 will work out well with the Yakima HD Bars like part #Y01157. The clamps are designed to work with crossbars up to 1 1/2" tall which is what the Yakima…

There is a ladder rack option available that will clear the bike in the bed of your 2020 Toyota Tundra with deck rail system while using the Thule Insta-Gater TH501 (updated version #TH93VR). I recommend Yakima OverHaul HD Truck Bed Ladder Rack for…

The internal length of the Rhino-Rack Fishing Rod Carrier #RR573F that you referenced has an internal length of 12-13/16 inches. That means there's 12-13/16 inches of width where it can carry the fishing poles.

The Yakima EXO #Y62VR and the GearDeck 17 are both premium hitch carrier options. The Yakima EXO #Y62VR holds 10 cubic feet and the GearDeck 17 #H00604 holds 17 cubic feet. The Yakima EXO #Y62VR has 100 lb capacity and the GearDeck 17 #H00604 has a…

Per the manufacturer the RedRock 4x4 Attack Stubby Winch Front Bumper is not tow rated. You can not flat tow your Jeep using this bumper and D-rings. If you decide on a bumper for your 2013 Jeep Wrangler that is tow rated, I recommend the following.…

For a base plate kit that fits your 2013 Jeep Wrangler I would recommend the Blue Ox part #BX1126 which is the easiest to connect and disconnect from. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

If I'm understanding you correctly, then you already have trailer wiring installed and you won't actually need the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles #HM56200. If you wanted to use the Hopkins wiring harness instead, then…

Hey Gabriel, You would need a factory wire harness from Dodge first and could then install the Pollak 5th Wheel / Gooseneck T-Connector with 7-Pole #PK11893-33-32 inline with the factory harness to get a 7-way socket in the bed of the truck as well.…