Search: rocker ball   >  

Hey Jason, thanks for reaching out! Yes, the Brophy Ball Mount for 2" Hitch #BH20 will work with the Curt RockerBall Shock Absorbing 2-5/16" Hitch Ball #C29FR perfectly!

As long as the Curt RockerBall has a 1 1/4 shank, like the #C29FR, you will have no issue installing it on the #C45340. With you using a ball that moves though, I highly suggest adding on the Roadmaster Quiet Hitch #RM-061. This will keep the #C45340…

The Convert a Ball ball mounts like the #AMSC4HD and the Curt Rebellion XD #part #C45949-2516 offer cushioning in a similar way (front to back cushioning) but the Curt Rebellion is going to offer superior cushioning to the Convert a Ball. The reason…

The height of the Curt RockerBall from the base that sits upon the ball mount to the top of the ball is as follows: - 2-5/16 inch ball with 1 inch diameter shank, #C82KR is 4.607 inches - 2-5/16 inch ball with 1-1/4 inch diameter shank, #C29FR is…

The u-bolts on the Blue Ox Hitch Receiver Immobilizer II part #BX88225 are only 3/8" diameter so as long as you have this much space it will work. That said, you will need to measure as we have not yet tested this. If it won't work we do…

The Curt RockerBall Shock Absorbing 2-5/16" Hitch Ball - 1-1/4" Diameter Shank - Chrome - 12K #C29FR does not fit weight distribution heads because the base of the ball is meant to fit the rectangular platform. If you remove that part of…

I do have an option for you but Atwood was bought out and their replacement parts are no longer available, including the repair kit you would need. The best option is to replace that A-frame coupler with a new one that attaches to a 2 inch hitch…

We have a folding table that our customers have mounted to the outside of an enclosed trailer. Check out the Tow-Rax folding table, #TWSP45HFTA. This table is 45-1/2" Long x 18-1/2" Wide and when folded would only add about 3 inches of…

You can absolutely trust the manufacturer ratings for the ball mounts we have available, regardless of whether or not they feature a solid or hollow shank. Ball mounts and other towing products are typically tested well beyond their actual listed…

You could use Roadmaster Quiet Hitch #RM-061-125 upside down but I don't think it is going to fit based on your pictures. Something smaller like Item #F-315 that goes into the shank of the accessory you are inserting into the hitch will likely…

A chrome finish ball #C40036 is going to look good but it will not be corrosion resistant. A ball with a machine finish like #C40087 , is going to have about the same corrosion resistance. In terms of performance they will wear at about the same rate…

The B&W Silencer Pad #BWTS35020 is intended to be placed on the shank of one of their Tow & Stow Multi-Ball Mounts like #BWTS10048B so that it acts like a gasket between the collar on the end of the hitch's receiver tube and the…