Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The weight capacity for the Rackem Trailer Cargo Control, part #RA-28 is listed at 400 lbs. This is the weight capacity for the complete rack, and not just one bar. When installing you need to make sure you have a solid place to secure the mounting…
view full answer...Yes, we do have a roof rack that will work with the rounded roof on your Interstate cargo trailer. It is the Rack'Em Fitz-All Enclosed Trailer Ladder Rack item #RA-28. This roof rack has a 400 lbs capacity and mounts to the side of your trailer…
view full answer...While the Rack'Em Fitz-All Enclosed Trailer Ladder Rack #RA-28 was designed to fit on trailer with a rain gutter, we have had several install it on their trailer without rain gutters. I have also included our review video below where you can see…
view full answer...Yes, the LED Light Kit for Draw-Tite, Tow Ready, Pro Series, and Rola Railed Cargo Carriers Item #98174LED is perfectly compatible with the 24x60 Reese Cargo Carrier for 2 Hitches - Steel - 500 lbs Item #63153 that you are planning on getting so this…
view full answer...There is an excellent option for a waterproof cargo bag for. One that will perfectly fit the 60" x 24" cargo carrier is from Curt: - Curt Cargo Bag for Hitch Mounted Cargo Carrier - Waterproof #C18211 The #C18211 is designed for large cargo…
view full answer...Yes. Based on the pictures you provided it does appear your trailer has rain gutters so the Rack'em Fitz-All Enclosed Trailer Ladder Rack #RA-28 will bolt on just fine. I included an installation video of the #RA-28 and a picture of the #RA-28…
view full answer...This Rackem Fitz-All enclosed trailer ladder rack system is intended for use on enclosed trailers with rain gutters. However, you may be able to adapt the installation as follows. Our installers have experience doing this in a similar circumstance.…
view full answer...This ladder rack comes will full instructions and installation hardware. To install use the provided self tapping stainless steel screws along with the plastic washers. The hardware you may decide to use can vary with the trailer shape and material.
view full answer...For the Rackem Fitz-All Enclosed Trailer Ladder Rack, #RA-28, to fit your 2011 Haulmark HLC trailer, the trailer would have to be between 4-1/2 and 8-1/2 feet wide with rain gutters along each side of the roof. I have included a link to the…
view full answer...The Traffic Cone Holder, #RA-26, that you mentioned is designed to store cones that are 12" - 36" tall, and the arm of the holder is 22-3/8" long. The arm does not fold down a full 90 degrees, so this would not be the best option for…
view full answer...We can get you set up with a good replacement for your 2,600 lb Fulton winch, but let's start with what you asked in regards to the strap vs. the cable, with the latter being the better choice. A strap is fine but there is a risk of fraying or…
view full answer...Thank you for your purchase of the BullRing Stake Pocket D-Rings #BU38FR for your 2015 Ford F-350! I reached out to my contact at BullRing who said that fitment looks just fine so that extra space around it isn't anything to worry about. The main…
view full answer...Related Searches
Filter Your Search
Contact and Help