Search: replacement torsion axle   >  

You need to use the Torflex Lift Kit #K71-707-02 since your 2020 Haulmark enclosed trailer has the tandem Dexter #10 Torflex axles. The Lippert Axle Riser Kit #LC382741 you found is only rated for Lippert's square torsion axles. While I do see…

It is certainly possible for any axle to wear out enough over time to need replacing. Since the suspension is built into a torsion axle if the suspension part was to wear out pretty much the only solution would be to replace the axle. If the…

The RhinoFLEX RV Sewer Hose Extension with Swivel Lug and Bayonet Fittings #CAM39765 and similar items do have removable orange fittings but there are not replacement parts available. If you have the fittings then you just need the hose #CAM39671. If…

On the frame of your trailer, near the coupler, there should be a plate that has axle information such as brand and capacity. There also should be information on the axle itself somewhere. Between checking those two places you should be able to track…

We do have a lift kit for your Lippert 7K torsion axle but the Dexter Torflex Lift Kits like part #K71-725-02 are designed to fit specific Dexter torsion axles. For example, the above mentioned kit will only fit a #12 Torflex axle that has a 5,500 -…

To determine the correct replacement bearings, races and seals for the oil bath cool hubs on your Ranger Boat Trailer you will want to remove one of the hub assemblies so that you can take note of the part numbers on the existing components. If you…

I can definitely help and point you in the right direction. We have a few lift kits available and it will just depend on exactly what kind of axles you have on your camper. The Lift kit #K71-725-02 that you were looking at will #12 Torflex axles with…

Yes, the Torflex Lift Kit #K71-725-02 is the correct one to use on your 5th wheel trailer with tandem #12 Dexter 7K Torflex axles. This kit will provide an additional 3-1/8 inches of rise and will help level out your trailer so it isn't nose…

The bolt hole spacing on the Torflex Lift Kit #K71-725-02 is 9 inches on center, and 9-1/2' on center. I have attached a photo with these dimensions, as well as a review video for you to check out.

The Torflex Lift Kit #K71-725-02 will allow you to add 3-1/8" of lift on your tandem axle trailer with #12 Dexter Torflex axles. Your axle has mounting holes in the side and top of the flange. You will bolt the lift kit to the side of the mount…

The brackets the fit tip for the #K71-725-02 is referring to is the bracket the axle fits into. I attached a picture that shows the bracket they are talking about.

We don't have any way of knowing what axles are on any one trailer so can't directly answer if the Torflex Lift Kit - Tandem Axle #K71-725-02 will fit. To determine the correct lift kit for your trailer you'll need to know the axle you…