Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Jason, thanks for reaching out! Yes, the Brophy Ball Mount for 2" Hitch #BH20 will work with the Curt RockerBall Shock Absorbing 2-5/16" Hitch Ball #C29FR perfectly!
view full answer...The height of the Curt RockerBall from the base that sits upon the ball mount to the top of the ball is as follows: - 2-5/16 inch ball with 1 inch diameter shank, #C82KR is 4.607 inches - 2-5/16 inch ball with 1-1/4 inch diameter shank, #C29FR is…
view full answer...The Curt RockerBall Shock Absorbing 2-5/16" Hitch Ball - 1-1/4" Diameter Shank - Chrome - 12K #C29FR does not fit weight distribution heads because the base of the ball is meant to fit the rectangular platform. If you remove that part of…
view full answer...The u-bolts on the Blue Ox Hitch Receiver Immobilizer II part #BX88225 are only 3/8" diameter so as long as you have this much space it will work. That said, you will need to measure as we have not yet tested this. If it won't work we do…
view full answer...The Convert a Ball ball mounts like the #AMSC4HD and the Curt Rebellion XD #part #C45949-2516 offer cushioning in a similar way (front to back cushioning) but the Curt Rebellion is going to offer superior cushioning to the Convert a Ball. The reason…
view full answer...Brake controllers are not vehicle specific, but their wiring adapters are. The #C51342 wiring adapter would be the correct adapter for installing a brake controller into your 2002 Silverado. The adapter would plug into the convenience center under…
view full answer...You may be able to use the DB-35 number as a cross-reference to an automotive brake pad, but that's not information we have access to since we don't offer automotive brake pads. I do know that the Titan #T4870900 are the replacement pads that…
view full answer...Yes, your Hayes/AL-KO 12,000 lb axle with a #120 spindle is absolutely compatible with the brake kit you mentioned, the Kodiak Disc Brake Kit #K2HR12A11-120DW. This kit does require you get the bearings and seal separately, but comes with the races…
view full answer...From what I have found, the ALKO hub and drum assembly you have is for 7,000 lb axles. I believe the Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 12" - 8 on 6-1/2 #8-219-4UC3 will work as a replacement. This has the same…
view full answer...The biggest difference between the servo styles that you'll notice is between free backing plates and the others. The free-backing plates will allow your trailer to back up without having the brakes lock up. With surge brakes typically when you…
view full answer...The Bargman 7-Way, RV-Style Connector #WG54006-043 referenced in your question uses the standard RV-style pin locations for its 7-Way connector. I have attached a diagram of these locations and their functions for you to check out. Wire colors will…
view full answer...There is not a flow rate listed for the SureCan Gas Can #SC78GR, so I cannot say how fast it is going to drain. If the main concern is fatigue from lifting and holding the can up, it has a similar flow as most gas cans you are probably used to using.…
view full answer...Filter Your Search
Contact and Help