Result: pigtail harness

The correct replacement control module for your Kwikee Steps with Control Module 909513 is the Lippert Components Kwikee Control Unit part #LC379606.

I spoke with my contact at Torklift and he said that from the pin hole of the part #TLA7901 to the platform measures 3-3/4 inches.

Yes, the TorkLift Lock and Load SideKick #TLA7901 that you referenced will fit a Honda 2200 generator like you mentioned. We had the chance to fit one on this carrier and it worked well. See attached picture. It's also in the review video for…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

The primary advantage of frame-mounted camper tie-downs like the TorkLift #TLF2012A and #TLF3001A, which are designed to fit your Ford F-350 if it has the 6-3/4 foot bed without a step/board underneath and a factory hitch, is the stability they…

The Bulldog Winch Rear Wiring Kit part #BDW20207 would allow you to power a winch from the back of a truck or on a car trailer no problem using the vehicle's battery. The leads attached to the quick connect would go from the winch to the battery…

To install a 7-blade in your 2017 Chevy Express van, presumably for a brake controller, you are going to need to do some hard wiring. For a brake controller the first thing you'll need is to add 4-way #118392 and I've added a link to a video…

There are different bases you can use for clearance light #MCL63CAB. You can use base #A65B that you have referenced. For that particular base you would use wiring harness #A68P. We also have base #A65PB or #A66PB. With these you would use wiring…

Your 4-pin/5-wire wiring harness is what is called a "wishbone" type which simply means that there are two separate running light wires, one brown and one pink. This allows a separate running light wire for each side of the trailer which…

The Replacement Lift Motor for Fan-Tastic Vent B Series Roof Vents with Powered Lifts made before 2014 are no longer available. If you have a vent made in 2014 or after, then you will use #FVK6010-81 which has a 17-rpm rate instead of the 7-rpm rate…

I spoke with my contact at Fan-Tastic Fan who verified the replacement lift motor options for Country Coach Motorhomes manufactured prior to 2014. She let me know that you'll be able to determine the correct replacement motor based on the…

The #FVK6010-81 does have a different design. You can still turn the knob for manual operation but you do not have to do the push and pull like the original for it to work.