Result: oem trailer wiring harness

I checked with Curt and our other vendors and the harness the relays are attached to in the Curt Vehicle Wiring Harness item #C56225 is not available to be purchased separately. You can purchase the relays separately for the 2022 Nissan Frontier with…

Yes, Curt has confirmed that the Curt Trailer Hitch Receiver #C13427 is going to be a compatible fit for the 2024 Hyundai Palisade. For the wiring you'll need the Curt T-Connector Vehicle Wiring Harness #C43FV. This wire harness has easy plug-in…

Sometimes hitches can get slightly bent during shipping and this can be fixed by bending the hitch back into place as long as the hitch only has a slight bend to it. If yours isn't lining up I can almost guarantee that is what happened. Some…

For the brake wire on your 7,000lb car hauler you will want to use a 12 Gauge Wire #12-1-1 for the power wire. The ground wire can either be grounded to the frame or you can use the Jacketed 2 Wire #12-2-1 if you are not using the frame as a ground.…

As long as your particular weight distribution shank is not specified as being for Rise-Only or Drop-Only use then it can be used in an inverted position to give you the height adjustment you need to keep your trailer level. For example, Reese Weight…

The Thinline LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 9 Diodes - Red Lens #STL59RB is a single light bar. If you needed both driver and passenger side, you would want to order 2 of these lights.

Dexter recommends that you check the wires of the brake assemblies of your trailer to determine which magnet would be what you would need. If the wires are white you would need part #BP01-265 and if they are yellow part #BP01-301. However, aside from…

The height adjustment for the Demco Hijacker Autoslide 5th Wheel Hitch with Slider - Ford Super Duty Prep Package #DM8550024 (18,000 lbs) and #DM8550038 (21,000 lbs) is found in the "Side Rail Assembly Instructions" of the hitch. I have cut…

The T-One Vehicle Wiring Harness #TK46VR is confirmed to fit your 2023 Mitsubishi Outlander per the manufacturer. I like the T-One harness over the other harnesses because it has a more reliable powered converter box that will give you a longer…

It sounds like the previous lights on your trailer used the mounting hardware for the ground. Your new LED light assemblies have a separate ground wire, which should be attached to a clean, bare metal surface. You will want to make sure that there is…

The Electric Jack part #EJ-3520-BBX is what I recommend using as it's an excellent economical upgrade option. If you are replacing an exiting electric jack then just run the power wire to the battery, secure the flange to the frame, and…

The easiest way would be to call your dealer's service department and have them run the VIN of your vehicle. They should be able to tell you exactly how your vehicle was equipped. You could also locate the tow plug connector, which is on top of…