Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The retractable tongue kit part #MPG494 that you referenced works perfectly fine with the Malone Microsport Lowbed part #MAL25FR that you also referenced.
view full answer...The Malone MicroSportXT Trailer - Aluminum Wheels - Retractable Tongue - 13' Long - 375 lbs #MPG460XT is a great option for the storage reasons you stated. The Rhino-Rack Nautic Roof Kayak Carrier w/ Tie-Downs - Side Loading - Clamp On #RR570…
view full answer...I have a great option that is going to work for you, though I checked with Yakima, and to use the Rack and Roll Trailer #Y08107 the top of the hitch ball must be 22" off the ground. An inch or two in either direction would work, but the seven…
view full answer...The Yakima Rack and Roll Trailer - 66" #Y08106 or 78" #Y08107 ride very well at highway speeds on long trips. These 16 inch wheels work very well at any posted highway speed in favorable conditions. Just like any trailer, you want to slow…
view full answer...The Malone LowBed MicroSport Trailer #MAL25FR and Malone MicroSport Trailer #MPG461B2 are very similar as they are both built on the same platform. This allows them to both carry the same weight and size kayaks. The #MPG461B2 has a 30" height to…
view full answer...Yes, you can use the Malone Second Tier Kit part #MPG474 on the Malone MicroSport XT part #MPG460XT.
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...Hey Tanya, thanks for reaching out! To tow your trailer you'll need a ball mount with a 2" rise and for that I recommend going with the etrailer Ball Mount Kit #e38NR. This gives you a 2-3/4" rise but that will still work for your…
view full answer...Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…
view full answer...Filter Your Search
Contact and Help