Result: mirrors

The Cipa Universal Door Mount Mirror #CM45000 ships as a single mirror. You will want to order 2 of these to do both the drivers and passenger side.

I would be happy to and thanks for the pictures! The B&W Heavy-Duty Trailer Hitch item #BWHDRH25122 measures 5.4" from the top of the frame brackets to the top of the receiver and 19-1/2" to the back of the receiver from the last bolt.…

I would be happy to help you with that. I went out to the warehouse and took some measurements of the Buyers Products Hitch Plate with Receiver Tube - Chevy/GMC item #3371809065. The distance between the two wings on the top outside edge of the hitch…

We have a dual fan setup that is VERY close to what you are looking for but is 1 inch deeper than what you mentioned with the part #D16833. This is rated for 3,750 CFM, is 24 inches wide, 17 inches tall, and 4-1/2 inches deep. If the depth is an…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

The highest rated hitch we offer for your 1992 Ford F-350 that has been confirmed to fit your frame width would be the Curt Hitch #C15300. This bad boy has capacities of 2,400 lbs tongue weight and 16,000 lbs total trailer weight. However this is a 2…

So there's one of two things going on here if your Curt 3-Piece Trailer Hitch Receiver #C15511 isn't lining up properly on your 1998 Chevy K3500 pickup. The first possibility, and the most likely, is that the hitch was slightly bent, or…

We've got you covered. The cab and chassis models did indeed have a 34 inch frame width. I'm not sure what kind of capacity you're needing, but because it's a dump truck on a 1 ton chassis, I'll give you a medium and a heavy duty…

If your 2022 Chevrolet Tahoe does not have the factory tow package then the plug may not be there. If this is the case you would need to hardwire in a brake controller. If your Tahoe does have the tow package then the plug will be under the dash. The…

It sounds like you might have the 2-5/16 inch hitch ball on a weight distribution head assembly which can limit the access to the hitch ball nut. The weight distribution head is bolted to the the shank that inserts into the trailer hitch. I am…

There is, Raymond To hook up the Tekonsha Prodigy P3 #90195 to your vehicle, you're going to need to test each of the wire for their functions, and attach them to the hardwire harness that comes with the controller. The black wire on the…

For your 1987 Chevrolet C/K Series Pickup the B and W hitch part #BWHDRH25198 that you referenced would work really great if you had a deep drop bumper but if instead you had a standard bumper you'd want the standard version of this hitch…