The Replacement Voyager WiSight 2.0 Wireless RV Backup Camera w/ Night Vision for Prewired System #ASA74YR, which is the WVSXP43 camera, is the camera that comes with the: -Voyager WiSight 2.0 Wireless Backup Camera System w/ Night Vision for…
The Voyager WiSight Wireless RV Backup Camera System #ASA37YR you were looking at is only compatible with the RV Backup Camera #ASA74YRor #WVH100 so this would need to be the camera you already have installed or you would need to replace the camera.…
We have the perfect solution but the Furrion Vision S W is not compatible with the pre wiring from Voyager. Instead the Voyager WiSight Wireless RV Backup Camera #ASA24YR is the way to go. This will allow you to use the already existing bracket to…
The Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision #ASA57YR does not have a power cord or adapter to allow it to plug into a USB outlet so you would need to install a 12v outlet, like part #RM-9332, in your vehicle in order to…
I checked into this with Dutton-Lainson, and the limitation on the #DL22120 offset spare tire has to do with the weight of the 15 inch tire and wheels, and not with the physical size. The welds on the carrier are not rated to handle the weight of…
The closest we have to a chrome finish is the PVD finish which comes in Black #460545MBPVD. If you're looking to replace all of your wheels then this PVD finish is supposed to be better than a chrome finish but if you're looking to match…
I think you are on the right track. The Fulton Bolt-Thru Swivel Marine Jack you mentioned, part #F1411300301, is rated at 1500 lb. With the jack fully retracted, the distance from the bottom of the mounting bracket to the floor is 12.5". I think…
In the image with the suspension setup the equalizer #TREQ105 is placed between the front and second axles. Just like you have on your trailer. The front of the equalizer connects to the spring using a shackle strap and the rear is connected directly…
I have attached a drawing of a typical triple-axle setup you can check out. I have noted the locations you would install the #LC281288 kit shackles, bolts, sleeves, and nuts. As you can see, one of the equalizers does not use a replacement set of…
The biggest difference between Dexter brake assembly #23-459 and etrailer/AxleTek assembly #AKEBRK-7L-SA is the pad material. The Dexter assemblies use pads that are snapped off of a long strand of the material. The ones on the etrailer assemblies…
There are some mounting holes started on the sides of the Yates Keel Pad #YR1203SB. You simply need to acquire mounting hardware from your local hardware or home improvement store to mount these on the crossmember of your boat trailer. Mounting…
If the trailer is heavy, or the ground is uneven, it will be hard to move regardless of which jack you use but if the bearings are wearing out in the old one then a new one would surely take some strain off the user when moving. I recommend a dual…
Filter Results
