Search: locking battery box   >  

The 12v accessory pin from the 7-way would need to be connected to the battery in order to charge it so you'd first need to make sure it was actually wired that way since not every manufacturer does. That being said the trickle charge coming…

Yes, all of the Firestone Ride Rite air suspension systems use 1/4 inch tubing and 1/4 inch NPT fittings like the #F2012 that you referenced. This kit includes 18' of red 1/4" air line, (2) 1/4" NPT (National Pipe Thread)…

The Spindle Grease Seal Set #BB60001 is specifically designed to fit on your 1" straight spindle using a Bearing #L44643 and 1.980 Bearing Buddy like Set #BB1980A-SS. The seal set includes 2 smooth stainless steel rings, 2 O-rings and 2…

I checked with SoftStart and they have a diagram for the install of their #SSR54FR on Furrion Chill RV AC units like the #FR58PR that you referenced.

Please see the attached images for wiring diagram and installation instructions for the Furrion Chill Replacement RV Air Conditioner for Furrion Setup, #FR86PR.

The lugs of a sewer pipe fitting can not be fixed so you would have to completely replace the fitting. To do that you'll have to first empty out the tank, which since your lug fitting has broken off will require you to hold the hose in place to…

There are no U-bolts to attach the slipper part, I recommend replacing your slipper springs with double eye springs. In order to do this you need to know the weight rating of your axle as well as the length from center eye to center eye so you can…

The parts that you have referenced have been obsoleted by Reese and they were unable to identify what you have. The closest weight distribution system currently produced by Reese is the #RP66542 which is rated at 12,000 lbs GTW and 1,200 lbs TW. The…

The Bulldog Universal mounting plate #BDW20291 has overall dimensions of 7-3/8 by 20 inches. The plate is 1/4 inch thick and the fairlead portion sits up about 4-1/2 inches according to my contact at Bulldog. The holes for the fairlead are 10 inches…

Because of the age of your Kwikee steps you would have to upgrade several components which would ultimately be about the same cost as a new set of steps. I recommend just replacing the steps to avoid any headaches and so that replacement parts are…

I checked with Kwikee and the correct replacement motor you need for your setup that has the LCI part number 369545 is the part #LC379147.

Trailer stabilizer jacks like #TJSCHD-24 are not designed to be used to lift a trailer and hold it up for maintenance. Their purpose is to stabilize the trailer while it's parked and no more. What you're looking for is a jack to hold the…