Hello Mekiah. So, we actually do not carry an axle that will meet your exact specifications. We do have a 6,000 lb axle that has a 86-1/2" hub face, part #e33GR. The spring seats on this axle are at 711-1/2" though, so they would have to be…
You are indeed right to think this way. When picking out the appropriate leaf springs for your custom built trailer you will want to choose them based on what the actual loaded weight of the trailer will be. Just make sure that the leaf springs have…
Slipper spring setups, like parts #e74SR and #APT6SE for 7K axles, do have different hanger sizes so what you'll want to do is cut off the older hangers and do some mock-ups of your new system before installing the hangers. Start off by mocking…
The slipper spring hook of a slipper spring like part #e67SR attaches to the equalizer and the eye of the spring attaches to the hangers of Tandem-Axle trailer hanger kit part #APT6SE. I have attached a diagram of how slipper springs are setup. I…
There is not a bushing on the hangers used on slipper spring trailers. Smaller single axle trailers will have a bolt that runs through the hanger, while some larger and tandem axle trailers will have a welded tube that the spring sits on, but…
A bushing is not required for the c-hook end (sometimes called an open eye end) of a slipper spring like the 4-Leaf Slipper Spring w/ Open Eye End #e33SR. The closed eye of this spring does have a bushing included; I have added a link to a video…
It appears you may have installed shackle straps which are longer than what you may have had. It appears your straps are either 3-1/8" #TRSL313 or 3-1/2" #TRSL350 and you likely only need a 2-1/4" #TRSL225. This would move the mounting…
Thanks for the pictures! Based on the weight of your 2008 Keystone Cougar 5th Wheel, you will want the item #LG-1 landing gear set. You are going to want to measure to be sure this is the right size for you. The two things you will want to measure…
Thanks for the picture! I have something close to your 26" slipper springs. It is possible to switch to a two eye leaf spring or even go down to a four leaf spring with a higher capacity. If you wanted to switch it up to a two eye leaf spring I…
Yes, our Dexter leaf spring part #DX74XR is the same as the part number 072-079-00. This is a 7-leaf spring for an 8,000 lb trailer axle that is 24-7/8 inches.
Filter Results
