Search: lc643923   >  

Hey Jim! The Replacement Back Cover for Solera Power Awnings - Drive Head or Idler Head - Regal Style - Black #LC643921 is a pretty simple installation that just requires you to remove the mounting screws, remove the cover, and then reverse the order…

Thank you for the photos! It looks like you have the Regal Style awning head so for a replacement front cover you need part #LC643923 for the idler side. If there is a clip missing on the back cover then I recommend replacing that as well so the…

John, the Replacement Front Cover for Solera Power RV Awnings #LC643922 does not fit both sides. This part is only going to work with the drive side, which would be the right side if you were facing the awning. For the left side, the idler side,…

Black or white are the OEM colors for the idler head. The Replacement Solera Manual Awning Head Cover Fastener - #6 x 1/2" Screw - Qty 1 #LC266156 is what you are seeking. You will need 6 of them for each head assembly.

The screws you would need for the Lippert Edge Idler Cover part #LC37UD are the part #LC266156 and you'd need a total of 1.

Based on the pictures you definitely need the awning support arm #LC281154. I can't tell in that other photo if the pin is bent or damaged, or just barely hanging in there. I'm also not sure if your idler head and roller endcap are ok or not…

I have attached the diagram with all of the dimensions of the Pro Series Square Jack - Drop Leg w/ Spring Return #PS1400950376 you are looking for. The Pro Series #PS1400950376 has a 10000lb weight capacity, is a direct weld on design, and includes a…

As long as your 26 foot travel trailer has an a-frame style trailer tongue and has tongue weight less than 4,000 lbs (it will) the Bulldog Powered-Drive Trailer Jack #BD500200 that you referenced would work great for you. Check out the review video I…

Yes, your Hayes/AL-KO 12,000 lb axle with a #120 spindle is absolutely compatible with the brake kit you mentioned, the Kodiak Disc Brake Kit #K2HR12A11-120DW. This kit does require you get the bearings and seal separately, but comes with the races…

The Kodiak Disc Brake Kit #K2HR12A11-120DW is the only hub we have that uses the Inner Bearing #TRJM511946, Outer Bearing #JM205149, Inner Race #TRJM511910, and Outer Race #JM205110. Those bearings are what fits with an ALKO axles using #120…

I spoke to my contact at Lippert and he told me the Replacement Cover for Solera Awnings - Idler Head - Front Cover - Black #LC643923 would be the correct replacement cover for your power awnings. If you need the motor side cover, that will be the…

Yes. All Solera awning fabric replacements like the #LCV000334341 come with the spot for a poly cord to be installed the length of the awning, which allows you to slide the light strip holder on and install your LED lights. You will want to save the…