Result: lag screw

The Stainless Steel Hex Lag Screw #FA74521 contains one 3/8" diameter, 1-1/4" long lag screw.

To be on the safe size, I recommend going with a 13 inch bracket #CE10002G-4 at the back of the trailer and an 11 inch bracket with #CE10003G at the front. A nice feature on these brackets is that they will each actually have as much as 3-3/4 inches…

So the U-Bolt will secure the CE Smith Light Duty, Vertical Bunk Bracket #CE10603G with the ends pointing towards the back of the trailer. If you look at the picture you took it looks like those fasteners holding your current brackets could be…

We have just what you need. For the two 5' bunk boards I recommend the CE Smith Carpeted Bunk Boards for Boat Trailers - 5' Long - 1 Pair #CE27820, but the longest board we offer is 7' so for the two 109" boards you will need to get…

The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-20 should be wired to the reverse light circuit on your 7-way. Although I do not have a specific wiring diagram, this is a simple process. There are two wires on your brake actuator. One will be the…

Wiring connections for the Electric Over Hydraulic Brake Actuator are as follows. Yellow - Cold side of breakaway switch, The wire that goes hot when a breakaway occurs. Black - Positive connection on breakaway switch, The wire that charges the…

For just the replacement slide unit for your DA91 actuator you would need the part #DM5942. The Actuator part #8759121 that you referenced has a slide mechanism built into it already and would work well.

I did some research and found that the 12194TC seal you said you have measures 1.250 inside diameter, and 1.979 outside diameter. The seal I recommend is part #34823. The dimensions listed for this seal are 1.249 inside diameter and 1.983 outside…

I spoke with my contact at CE Smith and the wood in the Carpeted Bunk Boards #CE27820 is a non-treated wood. The carpet though is marine grade carpeting.

I do not recommend using glue; instead, you should use staples to install the CE Smith Deluxe Marine-Grade Carpeting for Bunk Boards - Charcoal - 12' Long x 11" Wide #CE11372. You'll want to use staples to ensure the #CE11372 is always…

I went out to the warehouse to inspect a roll of the bunk carpet #CE11372. The back material is the same as the front but whereas the front is more fluffy, for lack of a better term, the back is matted. The shipping weight is 2 pounds. The actual…

The 11" CE Smith Deluxe Marine-Grade Carpeting for Bunk Boards like part #CE11350 for blue, part #CE11330 for black, or part #CE11372 for charcoal is recommended for 2x4 bunk boards. It should not overlap but you will need to trim for the…