Search: jm511946   >  

The spindle dimensions are as follows: A is the mounting dimension, B is the seal dimension, C is the inner bearing surface, D is the outer bearing surface and E is the diameter of the threaded portion of the spindle for spindle nut selection. Say…

Dexter recommends a SAE 90, SAE 80W-90 or SAE 75W-90 oil to be used. I recommend the Kodiak Synthetic Bearing Oil for Oil Bath Hubs #XLPROLUBE as it is a synthetic 90 weight oil that helps reduce friction and to keep bearings cool. Since your cap was…

The #99 trailer spindle is typically found on 9,000 lb and 10,000 lb axles. This is not a spindle that we carry at this time, but I did find some of the measurements. I have attached a diagram showing the dimensions of a #99 spindle for you to check…

After you've packed the bearings and assembled everything, carefully slide the hub assembly onto the spindle and install the outer bearing. Install the spindle and tang washer and run the spindle nut down finger tight, then rotate the hub back…

Yes, they will! Both the Kodiak Hub Spacer for 11" Rotor item #KHUBS99A and the Kodiak Disc Brake Kit item #K2HR10-13-HD, you were looking at, will fit a 10,000 lbs Hayes axle. These fit a #99 spindle with Inner bearing item #28580 and Outer…

Yes, your Hayes/AL-KO 12,000 lb axle with a #120 spindle is absolutely compatible with the brake kit you mentioned, the Kodiak Disc Brake Kit #K2HR12A11-120DW. This kit does require you get the bearings and seal separately, but comes with the races…

On oil bath hubs the seals are different than standard grease seals. The correct replacement for what you have is #91030. Unitized oil seals like this have a part that stays fixed and a part that rotates with the hub for optimum leak protection. I…

I spoke with Lippert and they said the Kwikee 35 Series Electric RV 1-Step part #LC3691461 will be a direct replacement for the Coach Steps 725-0041. It will be a bolt-on install for the most part for the exception of changing out the door switch…

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

Yes, the Blue Ox Avail tow bar #BX7420 is compatible with universal base plates #BX88266 assuming that you can install the brackets so that they are the proper width apart for the tow bar which is 38 inches or less on center.

There is a suggested and common method for 6 function trailer wiring. You will have the following functions: Right Turn, Left Turn, Ground, Tail/marker, Brake, Battery. I have included a help article on trailer wiring that includes a diagram and…

Based on the information you gave, although I can't help with the axle (other than to state it is a 3,500 lbs axle). Dexter mobile home axles were designed for one time use and weren't really documented for replacement parts, but because you…