Search: infinite rule   >   Hitch Pins and Clips   >  

The Gen-Y ball mount #325-GH-064 is 12-1/2 inches long from end to end. It's about 9-1/2 inches from the pin hole to the center of the larger of the two balls. This is longest ball mount for a 2-1/2 inch trailer hitch receiver and is rated…

The B and W Tow and Stow for GM trucks that have the Multi Pro tailgate that has the most drop is the part #BWTS20066BMP which has 7 inches of drop and fits the 2.5 inch hitch. This would be the correct hitch size for your 2020 GMC Sierra 3500 as…

The best trailer hitch for your 2024 Chevy Silverado 2500 to use a truck bed camper is the TorkLift SuperHitch Magnum Trailer Hitch Receiver #TL74FR. The #TL74FR makes it much easier to use a truck bed camper because it is pre-drilled to accept…

In regards to the Lock N Roll Articulating Channel Tongue Trailer Coupler part #336TS528, the distance from the bottom of the coupler base to the center of the mounting hole is 1-1/2".

In order to get this setup, you want to start with the Lock N Roll Articulating Trailer Hitch for 2" Receivers #336VS501. This will fit the 2" receiver on the hitch on your vehicle. For the trailer side, you will need to remove the…

For a stainless steel locking hitch pin that is compatible with the 2-1/2" hitch receiver on your 2011 Chevrolet Silverado 3500 HD we have the Curt #C23519. This includes 2 keys, is 5/8" in diameter, and has a usable pin length of…

There is a way for you to not only lock the B&W Tow & Stow 3-Ball Mount - Compatible with GM MultiPro Tailgate - 2.5" Hitch - 148K #BWTS20067BMP to your 2-1/2 inch trailer hitch, but also the ball platform to the mount, and the hitch…

Hitch pins like the Curt Reciever Lock part #C23519 that you referenced do not have weight ratings because they do not actually bear any weight, the key is to find one that is long enough for the hitch on your vehicle. The #C23519 has been confirmed…

I can confirm for you that the B&W Tow & Stow 2-Ball Mount will fit a factory 2-1/2" trailer hitch receiver on a 2020 Ram 3500. This has capacities of 7,500 lbs with the 2" ball or 18,000 lbs with the 2-5/16" ball, and a…

To determine the amount of rise/drop you'll need, take a measurement from the inside top edge of the hitch receiver tube to the ground. Then, measure from the bottom of the trailer coupler to the ground. The difference between the two numbers…

I would love to help but I can't really tell you if you need the B&W Tow & Stow 2-Ball Mount with 5" Drop part #BWTS20037B (part #BWTS20037C) or 7" Drop part #BWTS20040B (part #BWTS20040C) as it varies by application so you will…

The presence of a bed rug in your 2014 Silverado 1500 should not pose an issue for using the B and W Companion 5th wheel hitch #BWRVK3500-5W as long as there is no plastic bed liner under it. The feet in the base of the Companion should not be…