Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Chaz, yes the Reese ball mount part #RP82AR that you referenced can be used in the rise position. The torque rating for the ball's nut will be based on the hitch ball that you use and not the ball mount.
view full answer...Good afternoon Liz, there sure is! I highly recommend checking out the etrailer Ball Mount w/ Pre-Torqued #e99DR; it is rated at 10k lbs and has a drop of 2" which sounds perfect for your application. The ball is pre-torqued for you and the ball…
view full answer...To select the correct B&W Continuum Weight Distribution System for your needs you will first need to determine if you have a standard coupler(mounts on top of trailer frame rails) or an underslung coupler(mounts on the bottom of the trailer frame…
view full answer...An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. Measuring is not required if you just take a look at your coupler and see where it attaches to…
view full answer...The Hopkins Endurance 5th Wheel/Gooseneck Wiring Harness will connect on any vehicle that has a standard round U.S. Car type connector at the back of its 7-way. The linked photo shows the connectors on this part which plug in between the OEM harness…
view full answer...Hey Steve, so between the hitches that fit your 2022 Jeep Wrangler Sahara the etrailer part #e98856 and the Curt #C13392 have the exact same dimensions, and the Draw Tite part #DT78MR is slightly different. The only real difference is the length of…
view full answer...Since your boat trailer has a 7-way on it currently and has surge brakes what you would want is the 4-way to 7-way adapter part #37185 Kevin. Your 4-way will plug into this and all of the taillight functions of the 7-way will be active. If you also…
view full answer...The oblong holes are a no go, the spring bars will eventually fall out of the socket and the system would be completely ineffective as well as a danger to those around you. Also, if you are loading your trailer to the max then the system you have now…
view full answer...Kenda trailer tires are primarily made in China like most trailer tires. The only Radial trailer tires that I'm aware of that are made in the United States are the Goodyear Endurance line. Carlisle has a bias ply line of tires made in the States,…
view full answer...The Taskmaster tire #TTWPRG235R16 and most of all special trailer tires are manufactured by a couple companies that are based in China. The tire must meet the same DOT specifications for tires to be sold in the USA.
view full answer...Yes, both the 7-way and the 4-way of the Hopkins Endurance Multi-Tow 7-, 5- and 4-Way Flat Trailer Connector #HM48470 that you referenced are active at the same time. You could use the 7-way for towing and the 4-way for a light bar if needed.
view full answer...Yes, if you install this Ford Replacement OEM Tow Package Wiring Harness #118243 it will be fully functional and would work to operate the lockout solenoid of your 1999 Ford Super Duty. You will need to install the included relays and fuses to…
view full answer...Filter Your Search
Contact and Help