Result: hitch fabrication parts

Hey Spencer, we have confirmed in the past that the Andersen Ultimate hitches can be used with offset balls like the Gen-Y part #GY43XR.

It looks like the S8SL Trailer Coupling Preparation is the factory wiring that allows you to connect an OEM wiring harness at the rear. I don't have any information on the exact location to check and see if you have this on your 2024 BMW X7. I…

I would be happy to and thanks for the pictures! The B&W Heavy-Duty Trailer Hitch item #BWHDRH25122 measures 5.4" from the top of the frame brackets to the top of the receiver and 19-1/2" to the back of the receiver from the last bolt.…

It would appear your Trition UT16 utility trailer will have axles using the standard #84 spindle dimensions. You will want to verify this is what you have by disassembling one of the hubs and measuring the spindle, see image below. The spindle will…

The Curt hitch part #C31088 that you referenced is actually a front hitch so it would not interfere at all with the factory hitch on your 2019 GMC Sierra 1500. We do have the Curt hitch part #C15307 which is a confirmed fit for your truck with a…

You can absolutely use the Dexter 12 inch brake assemblies. If you have electric brakes then the Dexter Nev-R-Adjust Electric Trailer Brake Kit - 12" - Left and Right Hand Assemblies #23-458-459 with your current hubs. You may also want the new…

The standard size lunette ring is 3 inches like the Demco Lunette Ring - Adjustable Channel Mount - 3" Diameter - Black - 25,000 lbs #DM09557-81. The 2-1/2 inch rings will not fit in the adjustable channel mounts where the vast majority of the 3…

I checked with Fulton and the Spare Tire Carrier item #FETC0101 that you are looking at has an inner length of 9-1/8" and an inner width of 3-5/8". Depending on the width of your wheel you should not have an issues mounting this to your…

I had one of the #C52042 push to test break away kits pulled from inventory, and found that the bolt pattern of the #C52042 measures 5-1/2 by 3-1/2 inches. I've linked though our in-stock systems and haven't found a push to test break away…

The main battery box included in the Bright Way Push-to-Test Trailer Breakaway Kit #3802308 is 6-1/2 inches wide by 4-3/4 inches deep by 4-7/8 inches tall. The mounting hole centers are 5.9 inches apart. The wire leads on the breakaway switch are…

I checked with Aluma and they list a 14" Liger Wheel and Tire 60-0001396 as a replacement 14" wheel for their trailers but they do not specify the finish. We do have one 14" Liger Wheel item #LH84FR. It is gunmetal gray and has a 5 on…

Attached is a dimensional diagram of both the 15 Ton #337BP125A and 25 Ton #337BP225 Buyers Products Swivel Type Pintle Hooks. The diameter of the bolts holes are 0.53".