Result: hitch extention

That is an interesting situation; your TorkLift #TLF1002 and SuperTruss 42" Extension #TLE1542 are a combination not often used for bike racks. The use of a bike rack rated for use behind an RV would be your best bet, though there are no 5-bike…

Thanks for the picture! I would be happy to help you Yes, you are correct in assuming you will only need one set of the Swing Out Extension Brackets for HappiJac Truck Camper Jack Systems Item #LC182496. These come in pairs and you will not need them…

If you're looking for just the L-bracket for your HappiJac Electric Truck Camper Jack System #LC736514-ELKIT then you'll need part #LC182492. The flat bracket can be swapped out with part #LC182494 and the swing brackets can be replaced with…

I've honestly never heard of that being a common issue for Furrion monitors so you can easily replace it with part #C-FOS07TAPK-006 and you'll be just fine. Usually when something like this happens it's because the power cord was pulled…

The Furrion Standard RV Microwave, #FMSN09BL has actual measurements of 19-1/16" wide x 13-5/8" tall x 14-1/16" and requires minimum cut-out dimensions of 20-1/4" wide x 13-7/8" tall x 14-5/8" deep. From an online search…

There is not a plug and play adapter for your Lance connector that we are aware of. Typically this is installed by the Lance dealer. A junction box/7-way plug kit like #HS381-9000 is an option you have to convert the camper to match the 7-way RV…

A junction box/7-way plug kit like Epicord #277-000141 or #HS381-9000 lets you convert the camper to match the 7-way RV blade type connector format. This avoids the extra connection points and potential trouble spots from using separate adapters.…

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

If the touch pad is showing "Retract Time out Return Levelers for service" all you need to do is hit, enter and retract at the same time. That will clear that code. I confirmed this with our contacts at Lippert.

If you use the Curt hitch extender part #C45048 in the 24 inch length with a weight distribution system the towing capacity is 8,000 lbs. If the 24 inch length would work for you this would be a great option.

We do have a hitch extender that will work for your application. After looking thru the available options, it seems the Gen-Y Hitch Hitch Extender for 2" Trailer Hitches #GY89SR is going to be your best bet. This extension is 14" long from…

The Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide #C13704 has brackets that are 10 inches long with mounting holes 8-1/2 inches center on center. The height is right at 5-1/2 inches tall. I've attached a video to…