Result: hitch extension

Hey Tony, I really like the Torklift camper tie downs since they attach directly to the truck frame and provide a very strong and secure tie down location for the camper to attach to. The correct fit for your truck would be the part #TL22PR. Do you…

Hey Dave yes, the 22-1/2x49 Curt Cargo Carrier #C18113 is perfectly acceptable for your Mercedes-Benz Sprinter and will work great with a 2" class III trailer hitch. I'm not too sure what you plan on hauling, but you'll need to keep it…

Not all aluminum trailer frames are strong enough for use with a steel weight distribution (WD) system. It is possible that the stronger steel WD components could put too much stress on the frame. If your trailer has an aluminum frame you'll…

Hi John; Blue Ox uses the chart below in the instructions for the Blue Ox Trailer Hitch Receiver #BLU95UR. Since this uses 1/2”-13 x 4-1/4” Hex Head Bolt, Grade 8 you need a torque wrench capable of 119 ft/lbs. A 1/2" Drive like #PTW3001C would…

The trailer hitch on the truck is what supports the extension. The extension is designed to fit in a 2-1/2 inch receiver (measuring on the inside) and the receiver part of the extension has a 2 inch receiver opening. The only thing you need for the…

Assuming that your 2014 RAM 3500 is equipped with a 2-1/2" factory hitch, using the Titan Hitch Box Extension, #RP45018, will work well for you when towing your snowmobile trailer. As for the extension acting like a lever, this is true for most…

Hey Ben! All of the hitch extenders like the Gen-Y item #GY89SR are going to reduce your hitch's capacity by 50% so I am not sure that's going to work with your Land Rover's towing capacity. So long as you are not using a ball mount with…

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

I do have an option for you but the Adapters for Jeep D-Ring Bumper Mounts part #RM-035 are only compatible with RoadMaster tow bars therefore will not work with a ReadyBrake ReadyBrute Elite or Hercules tow bar. It also doesn't look like…

The only other extension that will meet your 36" requirement is the Titan Hitch Box Extension for 2-1/2" Trailer Hitches, 41" - 48" Long #RP45018. This extension would have a maximum gross trailer weight of 7,500 lbs/750 lbs of…

This is a great question that there isn't exactly a great answer for. Hitch extenders not only put the weight further away from the hitch which would increase the leverage on the hitch, but they also add movement to the assembly which will…

Your broken spring should be color coded to indict the weight rating of it. It'll be spray painted on the roller or the spring itself. I've listed the colors and their respective weights below; White: 10/110/210 LBS Green: 20/120/220 LBS…