Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
I have attached a drawing from the installation instructions for the rail kit part #C16430-204 you can check out. As you can see in the attached drawing I noted the carriage bolts and where they are located on the rails when installing. Please note…
view full answer...B&W does not but I have something that is comparable. B&W's Turnoverball systems and their Companion hitches work exclusively with each other and are not compatible with other gooseneck hitches like your Curt item #C611-624 or item…
view full answer...I have a solution for you but the Blue Ox Gooseneck-to-5th-Wheel Trailer Hitch Adapter item #BLU52XR does not offer any offset and would not give you enough clearance to make turns with your 6-1/2' bed. Since you have the Ram prep package with…
view full answer...We have two sizes of universal utility mat from DeeZee that could work for you. Part #DZ85005 measures 8 x 4-feet and is 3/8-inch thick. The smaller #DZ85009 measures 6 x 3-1/2-feet and has the same 3/8-inch thickness. The part you looked at,…
view full answer...Yes, they do make the Curt CrossWing Lightweight 5th Wheel Trailer Hitch #C86JR in a version that can be used with a B&W Turnover Gooseneck ball. That is the Curt CrossWing Lightweight Gooseneck-to-5th-Wheel Trailer Hitch Adapter #C32DR. The…
view full answer...Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…
view full answer...You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…
view full answer...Good morning, Kyle. The Furrion Vision S Cameras cannot be made to send signal to a Kenwood aftermarket rear camera display. The Furrion cameras are only compatible with the Furrion brand monitors. So, if you are in need of a new camera, I suggest…
view full answer...The outer diameter of the #TJD-7000S-BU bushing is 15/16-inches. The diameter of the hole in the bushing is 1/2-inch.
view full answer...There are many stereo units like the Jensen #JRV9000R that will allow for camera inputs, but we don't have any Kenwood units to confirm for them. The camera inputs are for hardwired inputs. The Furrion RV Observation Camera System w/ Monitor and…
view full answer...The Furrion camera system we have is a closed system and would not be compatible with the in-dash display so you would need to purchase GM's camera system to be able to connect to your display instead of having another monitor. If you do end up…
view full answer...The Hook and Keeper for Enclosed Trailer Door part #PLR9-A are not spring loaded. That said, we do have spring loaded options like the 45-Degree T-Style Hook and Keeper Door Holder for Enclosed Trailer part #37211765. We don't have any straight…
view full answer...Related Searches
Filter Your Search
Contact and Help