Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…
view full answer...Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…
view full answer...The KSource #KS62135-36G mirrors have manual extend/telescope and manual fold. They do offer heated glass, power adjustment, and lighted signals, if your truck is already equipped for those features on the stock mirrors.
view full answer...A Reese Revolution and a Sidewinder Pin Box are essentially the same thing. It is simply called a Revolution when it comes as OEM/factory equipment on a trailer. The aftermarket product is called the Sidewinder. There are some very minor differences…
view full answer...Yes, there is an option to add an aftermarket under bed puck system to your 2018 Chevy Silverado 2500. It is the Elite Series Under-Bed Gooseneck Complete Hitch item #RP30158-68. This under bed system has a towing capacity of 25,000 lbs. I have…
view full answer...Suspension enhancement would be a good idea to get rid of the squat you are experiencing when towing with your Fastway E2 weight distribution system. The best option is the RoadActive Suspension kit part #RAS54FR which gives you the support you want…
view full answer...The overall dimension of the B&W Companion 5th Wheel Trailer Hitch with Slider #BWRVK3400-5W is 45 inches long x 34-3/8 inches wide. The hitch measures 15" from hitch post to furthest part of the front (or cab-side) of the hitch.
view full answer...I was able to pull up the online towing specs for your 2018 Ford F-150 and it looks like there is still a somewhat large potential range even within the specs that you provided depending on your axle ratio, drivetrain, and wheelbase. At the low end…
view full answer...To add a 5th wheel hitch to your short bed 2024 GMC Sierra 2500, I recommend the B&W Companion with Slider item #BWRVK3775. This 5th wheel hitch has a 20,000 lbs capacity and will mount directly to the puck system for easy installation and…
view full answer...It depends on the dimensions of the recessed gooseneck, but it is possible you can use the Shocker 5th Wheel to Gooseneck Pinbox for Lippert 1716/1116/0115 and Fabex #SHK55MR. If you take a look at the diagram from Shocker you can see the necessary…
view full answer...We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…
view full answer...If your trailer has 7 wires running all the way back to the brakes, then yes, you can tap into the existing wiring. Each of your new brakes will have two wires for the brake magnet. One wire is for 12 volt power to the brake magnets and the other…
view full answer...Related Searches
Filter Your Search
Contact and Help