Search: fifth wheel and gooseneck wiring   >  

Yes, the temperatures you mentioned are normal. If you were getting over 200 degrees that would be a bad sign. But typically if all of the hubs are the same temperature you're good and it's only really an issue if one of the hubs is…

I definitely understand how safety chain capacities and determining exactly what chain rating you need for your trailer can be a bit confusing. To keep it as simple as possible, safety chain requirements state that the breaking strength of EACH…

When installing an above-bed base rail kit on your 2015 GMC Sierra 2500 The Demco Hijacker Premier Series Above-Bed Base Rails and Custom Installation Kit for 5th Wheel Hitches #DM8552011-71 is confirmed to fit the 2015 GMC Sierra 2500 6-1/2 foot…

In regards to a Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter like part #RP94720 and a Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Adapter Pin Box like part #325-GH-8045, the main difference is that one uses air for…

Each of the chains of the #RP49151 are rated for 10,000 lbs for a combined capacity of 20,000 lbs. For the weight of your trailer when fully loaded you'd be better of with the part #63451 which has a 26,400 lb PER chain capacity.

The Fulton Safety Chain with Clevis Hook #FCHA0050324 referenced in your question features a weight capacity of 18,800 pounds. I went out to our warehouse to take a look at the chains and found that this particular rating is not stamped onto the…

When it comes to installing The B&W Companion OEM 5th-Wheel Hitch for Ford Super Duty Prep Package - Dual Jaw - 20,000 pounds #BWRVK3300 on your 2019 Ford F-250 Super Duty The Replacement Head Assembly for B&W Companion 5th Wheel…

The B&W Companion 5th Wheel Trailer Hitch #BWRVK3500 (RVK3500) is the complete 5th wheel hitch that will mount to an existing B&W Turnoverball Gooseneck Hitch socket in the truck bed. The part #BWRVB3500 (RVB3500) that you also…

The head of your B and W Companion hitch part #BWRVK3500 is adjustable front to back which allows a few different options. The best location is the forward-most position you can use that allows you enough clearance to make tight turns. Since you…

You are correct, you should only be getting output when the brake is applied, or the override switch is activated. It sounds like the controller might be bad, but to make sure, you should probably bench test it before tossing it. Use a circuit…

The blue wire coming from the brake controller to the trailer brakes is the brake power output wire used to tell the trailer to apply the brakes once given the response from the brake controller. Therefore, you should not have a constant charge to…

For everything minus the rails of the kit you have now all you'd need is the part #50043 which is the brackets and hardware needed.