Search: ez connector   >   Tow Bar Base Plate   >  

Yes, the Lippert Replacement Hydac Cartridge Valve for RV Slide-Out Hydraulic Pump #LC177094 is a valve that can be used with your Lippert Replacement Hydraulic Power Unit with 2-Quart Pump Reservoir Kit for RV Slide-Out IRC System #LC141111. I…

The No-Drill Mounting Clips for EZ Connector #319-S7-60B2 referenced in your question will replace both the 7- and 4-Way receptacle on your Sierra 3500. There is not a mounting clip available from EZ Connector that would replace just the 7-Way…

EZ Connector Mounting Bracket #319-S7-61 is compatible with their 7-way vehicle socket #319-S7-05 as well as their 14-pin socket #319-S14-05-6. Both share the same mounting hole spacing that is shown in the linked photo. For a crimping tool I…

For an EZ connector style of 7-way that is confirmed as a fit for your 2022 Chevy Silverado 2500 you'd want the part #319-S7-06. This would be exactly what you are looking for.

I do have a solution, but there is not an adapter that would allow you to replace the OEM connection and keep the factory look on your 2020 Tundra. Since nothing will match that cutout, I have two options that will allow you to use the EZ Connector…

If your 2008 Ford F-450 does not have any existing connector installed at the rear of the truck, you will need to start by installing a 4-Way. For this, I recommend the Tekonsha 4-Pole Hardwire Kit #18252. This universal harness includes the needed…

I verified with the manufacturer that 16 gauge wire is used for each wire of the EZ Connector Magnetic 14-Pin Trailer Connector #319-S14-07-6. It does come with the needed butt connectors for splicing, so those aren't required to purchase…

Thanks for the picture! The Optronics Flexible LED Light Strip item #UCL90CB is extremely versatile. It will connect to any 12-volt power source so I am sure whatever power source and switch your lights are currently running off of will work with…

The TecNiq Industrial LED Scene Light #TN43XR has 3/16" diameter mounting holes spaced 16" apart on center (see attached).

For your 2015 GMC Sierra you will need BOLT hitch receiver lock #BL7023582 for 2 inch and 2-1/2 inch trailer hitches.

Thank you for all of the information and your photo! It really looks like you've done your research with all of the various solutions you've looked at to try to prevent damaging the connection between your Lance Truck Camper and your…

The wires of the breakaway switch part #K71-691 are 14 gauge. The difference between it and the Dexter breakaway kit part #N65113 is that Bargman makes the N65113 and Esco makes the #K71-691. the Esco one is only one made in USA. They will function…