Result: etcb7

Hello Chris. The #ETBC7 kit your mentioned can be used for this purpose. This is more of a universal solution that works on any vehicle. The #118283 that I mentioned is a custom wiring harness and will be a much better option. Since you already have…

I have exactly what you need to add a 7-way trailer connector to a 2016 Honda Odyssey. For this, you'll need to start with a 4-way trailer connector and I recommend the T-One Vehicle Wiring Harness part #118521 which is plug-n-play. Then you can…

To add a 7-Way connector to your 2016 Honda Odyssey you will need to add two different wiring harnesses. The first harness you will need is the Curt T-Connector Vehicle Wiring Harness item #C56378. This harness is custom fit and plugs into existing…

To install the excellent Tekonsha Prodigy P2 Trailer Brake Controller #90885 on your 2019 Ram 1500 you just need the Plug-In Wiring Adapter #3024-P. The factory brake controller port should be located underneath the dash, above and in front of the…

The ground wire from the Hopkins Endurance 4-Way to 7-Way Adapter, #HM47200, should be grounded to either a clean, bare metal surface on the frame of the vehicle or to an existing ground stud on the vehicle. On the trailer side, the ground wire from…

We do have a solution for you, though the Reese Trailer Connector Adapter #78118 will not work for you. Instead I recommend the Hopkins Endurance Quick-Install Trailer Connector Adapter #HM47200 which will plug into your truck's 4-way and allow…

Okay, we can get your 2022 Hyundai Tucson set up with a 7-way so you can do some towing with a hitch that fits your vehicle, the Draw-Tite Max-Frame Trailer Hitch Receiver #DT22MR. What you will need are a couple of parts; first the 4-flat, which…

Since your 2022 Tucson already has a 4-way connector you will need the Universal Installation Kit for Trailer Brake Controller item #ETBC7. The kit includes a pre-wired 7- and 4-way trailer connector that mounts easily at the rear of your Hyundai…

On the back of each brake backing plate, you'll find an oblong hole near the bottom, which might be covered with a mud and crud plug. Once you pry the plug out, you can use a brake adjusting tool like #W80630 to adjust the brakes. A flat blade…

In order to be able to plug in a brake controller on your 2011 Ford van it will have to have come with either a factory 4-Way or 7-Way trailer connector. If it did not then the brake controller will have to be hardwired in. On a 2011 Ford E-350 Van…

The parts needed to start towing with your 2009 Smart fortwo include the following: - Curt Trailer Hitch Receiver #C11020 - Curt 4-Way Flat Trailer Connector #C58044 - Mounting Brackets #18144 and #C83DR - Ball Mount (see attached helpful article)…

I recommend going with the Curt towing parts for your 2016 Mitsubishi Outlander: - Curt Trailer Hitch Receiver #C13163 - Curt T-Connector Wiring #C56296 w/Tow Package or #C56189 w/o Tow Package - Mounting Brackets #C42CR and #C83DR - Curt Towing…