Search: electric stabilizer jacks   >   Accessories and Parts   >  

You made a great choice in the Lippert Components Power Stabilizer Trailer Jack. For starters, all of the jacks measure to be 70-1/2" long with a 3,500 lb weight capacity and have a 30" lift. The difference between them is in…

A pressure relief valve is necessary for the Fogatti RV Tankless Water Heater - Gas - Automatic Pilot - 41,800 Btu - Black, part #LSB44FR, per the instructions and in accordance with ANSI standards. It appears this tankless water heater only comes…

The replaceable parts for the Lippert PSX2 stabilizers include the following: Switch and Harness - #LC387874 Switch Hatch Box (White) - #LC134025 If you're needing to replace the entire unit we don't have the PSX2 but we do have the…

It looks like the trailer manufacturer created their own lift brackets to use with the older Lippert High-Speed Power Stabilizer Jack. I'm sure you could reuse these by welding the new Lippert High-Speed Power Stabilizer Jack part #LC298707 to…

The Lippert Stabilizer Jack 347132 (discontinued part LC363284 on our site) has mounting hole centers that are 68-11/16" apart which is the same as our High-Speed Stabilizer Jack #LC298707 so it can definitely be used as a replacement! The…

First you will want to use a Test Light #PTW2993 to verify if you are getting power to the switch on your stabilizer. There will be 4 wires to the Switch #LC387874. The 2 wires going away from the stabilizer are going to be the power and ground…

The Lippert Components High-Speed Power Stabilizer Jack - 30" Lift #LC298707 does have a manual override mode in case the motors or battery have an issue. You will use a 5/16 inch socket if that is ever needed and I've attached the portion…

I attached a picture that shows the install instructions for the Lippert Components High-Speed Power Stabilizer Jack #LC298707 that you referenced and in it you'll notice a set distance isn't specified for where it has to install on the…

For your Lippert Components Power Stabilizer Trailer Jack #LC298707 the wiring is pretty simple. There are two wires that come out of the motor and they are both used as power or ground depending on the direction you want to turn the motor. To…

The direct replacement for your Lippert Model 113407 stabilizer jack is part #LC369774. I confirmed this with my contact at Lippert. It requires an easy bolt-on installation.

The JT's Strong Arm Jack Stabilizer Kit for Travel Trailers #LC191025 can be used with the Electric Stabilizer Jack Pad Adapter for JT's Strong Arm Jack Stabilizer Kits - Qty 4 #LC314597 and each kit will work on two stabilizer jacks.…

The correct replacement converter for your Parrallax 7300 Model 7355 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 55 Amp #PD4655V. This is an exact replacement but it only comes as a full assembly, you can not…