Result: elec magnets for electric brakes

You would want to use the Westin HDX Winch Mount Grille #57-3905 which is a confirmed fit on all 2019 Ford F-350 models without front cameras, including the Lariat edition.

I was unable to find any information with the numbers on your axle, unfortunately. However, you can contact the manufacturer of the trailer and they should be able to tell you exactly which inner and outer bearings you have. If for some reason they…

The left side is the driver side, right side is passenger side. On a trailer brake assembly like #23-105 the arm that the magnet is on points to the front of the trailer and the magnet always will be on the bottom. I have included a picture that…

The right and left orientation is determined if you are standing behind the trailer looking towards the tow vehicle. The left side is the drivers side and the right side is the passengers side. Tthe shorter brake pad will always be in the front of…

The brake assemblies that are on your 8k Dexter axles most would be the Dexter Electric Brake Assembly #23-435, the replacement brake magnets for this assembly would be the Replacement Magnet Kit #BP01-301.

Okay let's get started here with the suspension for your 2012 Skyline Koala 27CDS with 3,500 lb Axles; for the first part regarding your equalizers and suspension upgrade kit, so long as your current equalizer is spaced 6 inches (or close to it -…

The Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 8,000 lbs #K71-653-00 will most likely fit your assembly but may not offer as much cushion as desired for your small axles. You may instead want to consider the Equa-Flex…

It sounds like the ground connection often in the mounting hardware of your lights is not connected well. This ground needs to be bare metal to metal and free of all corrosion and debris. If with a clean ground you still are not getting the desired…

There is no specific torque rating when reinstalling the castle nut after packing the bearings. You want to run the nut down until there is no side to side play in the hub, and then back it off to the next notch in the castle nut so the retainer can…

The E-Z Flex Equalizer for 1-3/4" Double Eye Springs - 8-3/8" Long - 9/16" Center Hole #013-146-03 is the best upgrade option for each equalizer your 2019 Keystone Bullet 243BHS. This will give you a suspension upgrade with integrated…

The short answer is Yes, bearing #15123 is slightly larger and stronger than #LM67048 and they use different races which means they are not interchangeable. Bearing 15123 uses race #15245 which has an outer diameter of 2.441 inches and bearing…

The inner diameters of the LM67048 and 15123 both are the same (1.250 inches). That means that a hub with either bearing in the outer bearing would fit your spindle. The part #AKHD-655-6-EZ-K would fit your axle.