Search: e47ZR   >  

Hey Scotty, thanks for reaching out! Here are the parts I recommend for flat towing your 2006 Chevy HHR safely and with a price-conscious mind: - Roadmaster Crossbar-Style Base Plate Kit #3141-1 (requires minor fascia trimming - see attached install…

The Curt T-Connector Custom Vehicle Wiring Harness with 4 Way Flat Trailer Connector item #C96JR will allow you to connect the taillights on your tow vehicle to the taillights on your 2021 Jeep Wrangler. This will allow you to control your Jeep…

Hey Lisa, To flat tow your 2020 Jeep Grand Cherokee Trailhawk you'll need the Blue Ox Tow Bar Wiring Kit #BLU86XR. This wiring harness comes with connectors to plug inline with your factory tail light wiring. If you haven't picked out the…

A base plate kit is the hardware that gets bolted to the front of a vehicle which is what provides the attachment point for a tow bar when flat towing. I attached a link to this page that is a help article that covers what base plate kits are as well…

We do have an option for you that is going to protect your 2009 Honda CR-V, though the Blue Ox KarGard you mentioned does not work with your set up. Instead what you will need is the following: - Sentry Deflector for Demco Tow Bars #DM9523135 - Demco…

The only compatible Blue Ox baseplate for a 2011 Chevy HHR is the #BX1692, which has a bracket spacing of 22". The Blue Ox Acclaim Non-Binding Tow Bar #BX4330 requires a spacing of 23" - 30" so it will not be compatible with the…

The best hitch for a 2024 Subaru Crosstrek is the etrailer item #e98912. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity and a 525 lbs…

The Demco Commander II Non-Binding Tow Bar for Blue Ox Base Plates #DM9511012-BX and etrailer SD Non-Binding Tow Bar for Blue Ox Base Plates #e47ZR are very similar, with just a few cosmetic differences. Demco is who we use to produce the etrailer…

The Battery Disconnect part #RM-766 installs on the positive battery wire so that when activated all power is cut for the vehicle. See attached chart. What you would need to do is install the #RM-766 after the connection you have for your Brake Buddy…

The Demco Tow Bar Storage Cover #DM9523042 is a confirmed fit for the etrailer SD Non-Binding Tow Bar for Blue Ox Base Plates #e47ZR that you mentioned.

Longer arms will simply place the towed vehicle further back giving you a bit more turning clearance. That being said, the difference is so small you probably wouldn't really see any benefit. When I recommend tow bars, or any other product for…

Yes, the etrailer #e67ZR tow bar is made for etrailer by Demco in the USA and has a lifetime limited warranty by etrailer. Demco parts will work on this tow bar, but Demco has no responsibility for warranty, repair, or service - you would need to go…