Search: e track wheel chocks   >  

Hey Steve, yes we do have backing plates for the e-track wheel chocks part #EM09160 like the part #e66RR for a set of 4. The holes will definitely line up.

The Fastway Flash E Series HD Adjustable Ball Mount #FA42-00-2925 referenced in your question has a distance of 16 inches from the top of the shank to the bottom of the unused hitch ball when set at its lowest position. This will certainly provide…

I have a solution for you, and while most Fastway products are made in the U.S.A. it looks like the steel #FA49-00-5925 was not. Instead, I recommend using the aluminum Flash E Series HD Adjustable 2-Ball Mount #FA42-00-2925 which has a similar…

I have a great solution for you. Check out the Shocker Hitch XRC Cushioned Ball Mount for 2-1/2 inch hitches part #SHK94RR. This gives you 7-1/2" drop, so a little less than the Fastway kit, but since it does not carry the extra ball below the…

Yes, the wheel of a motorcycle or bicycle can rest on an e-track no problem.

I have a solution for your ball mount needs; I recommend the Flash Strong Solid Steel 2-Ball Mount - 2.5" Hitch - 10" Drop, 9" Rise - 20K #FA49-00-5925. The 2-5/16" hitch ball on this has a 20k capacity which is the most of any…

For your 2022 Chevrolet Silverado 2500HD with the Multi-Flex tailgate B&W has a line of hitches that were specifically designed for your tail gate in mind. B&W Tow & Stow 2-Ball Mount #BWTS20066BMP B&W Tow & Stow 2-Ball Mount…

The Flash Solid Steel HD Adjustable 2-Ball Mount #FA49-00-5925 does have a bit of side-to-side play against the drop-bar, and this is typical of all two-piece adjustable ball mounts. How much play depends on the manufacturer, but typically it is…

The manufacturer does not provide a weight rating for the Erickson E-Chock Wheel Chock for E-Track, #EM09162. These are designed with overall dimensions of 8-1/2" long x 6-3/8" wide x 4-1/2" tall and to be used with a tie-down strap.…

I checked with Yakima and they informed me that the length of the Replacement Tongue for Yakima Rack and Roll Trailer #8880204 is 69 inches.

You are correct, the Replacement Tail Block Locking Assembly #8880334 is only for the 2015 and up model year Rack and Roll trailers. According to Yakima, the reason is the thickness and length of the shaft was increased, so it's a different size.…

The MaxxAir MaxxFan Plus - Smoke #MA00-04500K will work on your fiberglass truck cap, but highway speeds will not allow it to stay open. The remote will work fine from inside you truck cab. If you want to be able to drive the highway speeds, I…