Search: dual hitch adapter   >  

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

Depending on the hitch your 2017 Jeep Wrangler has, there may be enough clearance from the spare for you to use the Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes #HLY84FR. In order to determine this, you'll need to take a quick…

The distance between the tabs of the Adapter for Blue Ox Tow Bars to Demco Classic Base Plates #DM9523034 that you referenced is 1-5/8 inches.

As long as the flat tow wiring is wired in before the 4-Way #C93ZV and you connect the power for the converter directly to the battery it will work. I have seen several use Magnetic Lights #TL21RK which they will wire in on the main harness to have…

Yes, the Gen-Y Adjustable 2-Ball Mount #325-GH-414 can be used with any standard 2" ball mount or trailer hitch receiver, such as what your SUV is already equipped with. For just the receiver portion of this unit without the hitch balls you can…

If you're wanting to use the Roadmaster Dual Hitch Receiver Adapter #RM-077-2 for towing a tow dolly then yes, either receiver can be used. If you're talking about towing a trailer then we need to find you a different adapter because these…

I may have some solutions for you, but there are not any ladder racks available for a 2020 Honda Ridgeline and there are not any tonneau covers that are compatible with an over the bed style rack system. However, you can use a tonneau cover and roof…

There are only two Tow-Rax Tie-Down Anchors, the Tie-Down Anchor for Tow-Rax L-Tracks part #TWSPSSTD which is designed to be used with Tow-Rax L-Tracks like part #TWSP6DTAB and the Tow-Rax Tie-Down Anchor for Tow-Rax Low-Profile Floor Tracks part…

As long as you are not exceeding the tongue weight rating of the trailer hitch receiver or dual hitch receiver adapter, you will not have any issues adding your 150lb accessory with the adapter as is, but I do not recommend modifying the adapter in…

For a first-time base plate installer we estimate that the total time required to mount the Blue Ox Base Plate Kit #BX2261 to be a good 5 to 6 hours (half a day, let's call it). Our installers who have the benefit of having done this many times…

GM states in the owner's manual that to recreationally tow the vehicle, the negative battery cable must be disconnected. The owner's manual doesn't list a specific reason, it only states that failure to do so could damage the vehicle. The…

I measured the Roadmaster Dual Hitch Receiver Adapter #RM-077-8 for you. On the long support arm the distance from the back of it to the center of the hitch pin hole is 6-5/8 inches. But to the support gusset that measurement is 4-3/4 inches. I have…