Result: dm5425

It's not uncommon for a tandem axle trailer to have brakes on only one axle. Typically for utility trailers which have more weight towards the front the front axle is the one that will have the brakes and trailers like boat trailers which carry…

Since your current Atwood surge drum actuator is welded to your trailer frame what you'll need to do is take the trailer to a welder who can cut the welds and remove what you have now and in place install a weld on coupler designed for disc…

Wheel bolt patterns are defined by two numbers: the first being the number of lug nuts and the second being the diameter of the circle the lug nuts are arranged in. So a 5 on 4-1/2 bolt pattern is 5 lugs arranged in a circle that is 4-1/2 inches in…

I looked up your Dexter 8-222 Hub and was able to find the inner and outer bearing numbers as well as the grease seal used. It looks like this particular hub was designed for mobile homes and these, for the most part, have more unique bearings and…

We had a customer who was able to replace his Dexter 8-155 hubs with the #8-201-5UC3-EZ that you referenced so they should work well for you. You can verify that this hub will work for you by pulling your current hub and making sure they have inner…

Yes the Replacement Brass Connector #T4750300 for Titan Disc Brake Actuators will fit a Tie Down 660e disc brake actuator.

To replace your AL-KO 568303 seal you will want the Oil Seal #91030. This seal has the same inner diameter of 2.750 inches and outer diameter of 3.779 inches. It is a confirmed fit for your #99 spindle that uses the AL-KO 568303 seal.

Though we do have the Bearing Buddy #BB2441T-SS that is a direct replacement for Tie Down's Turbo Lube oil baths, this will require you changing over to grease instead of oil. With that said, we do also have the Kodiak XL ProLube Kit…

The inner bearings should be #LM48548 (1.375 inch inner diameter), outer bearing should be #L44649 (1.06 inch inner diameter) and the grease seal should be #58846. I would recommend you pull your bearings out to verify that but that SHOULD be what…

The key number you referenced having is associated with an older Diversitech ball mount. I do have an option available for you to consider, however we do not currently carry the replacement key for the R3223 model as it's not available. If you…

The appropriate torque spec for any application will vary depending on the construction of the wheel as well as on the stud size. I suggest checking the wheels you're using to see if their manufacturer has a suggested torque rating. Steel trailer…

I reviewed all of our trailer wheel bolt inventory and did not have a match for your request. I also contacted our suppliers and was not able to make a match there. The bolts I found were not 13 threads per inch coarse, nor left-handed. I suspect you…