Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
I reached out to Dexter to confirm the proper hubs for a #9 axle. There are not any 6 bolt options available from any of our manufacturers that fit your spindles. We have 5 on 4-1/2 inch like you already have and 4 on 4 inch bolt pattern only for…
view full answer...Hey Mike, there isn't a way to get just the pump of the assembly you are in need of so the only solution would be the part #LC251910 that you referenced.
view full answer...I spoke to my contact at Dexter Axle, they told me the Dexter Axle Torflex #10 Axle Side-Mount Frame Installation Hardware Kit #DX54FR is made of steel. They also said that there is not an aluminum alternative.
view full answer...We do carry the Dometic RV Water Heater #DMC74FR which you could use to replace your Atwood G6A-8E 6 gal RV Water Heater, but I highly recommend switching over to a tankless system like the Furrion RV Tankless Water Heater 60,000 BTU #FR98SR. This…
view full answer...Hello Xiaoming, Yes, we do have the Dexter K71-622-00 available, though it's under a different part number for our site. What you need is the following: - Dexter Replacement Trailer Axle Spindle Retainer Kit #DX82CR This includes two D washers,…
view full answer...Thanks for the information! Based on the information you provided my contact at Dexter was able to confirm that you have a 3500lb axle with a 94.5" hub face to hub face measurement and an 81" spring center to spring center measurement. For…
view full answer...If you can read me the serial number on the axle I can then call the manufacturer, Dexter, and find out the weight capacity but if not you can measure the diameter and use the chart below to determine axle capacity. The "P16" is the plant…
view full answer...Depending on how the trailer was made, there will be a few spots you can check to identify the axle. First, if the trailer was pre-made by a specific company, you may be able to find this information in either the paperwork or on a placard somewhere…
view full answer...The only size wheels we have with a 5 on 4-3/4 inch bolt pattern is the 15 inch wheel size like with the part #KE79JR which has the tire size ST205/75R15 mounted on it.
view full answer...It does take quite a bit of force to manually push in an actuator with or without the cap on. But the cap should be off when you bleed the brakes. Also, the longer the board the more leverage you can put on the coupler and the easier it will be to…
view full answer...There are really only two standard trailer tire sizes for 15" wheels, 205/75-15 and 225/75-15 with the latter being the taller option (28.4" diameter x 8.9" wide vs. 27.3" diameter x 8.1" wide). I recommend the Karrier…
view full answer...If you're needing just the wheel then we offer the Steel Mod Silver Trailer Wheel - 15" x 5" Rim - 5 on 4-3/4 #AM38NR. If you'd like the tire as well then we also have the Karrier ST205/75R15 Radial Trailer Tire with 15" Silver…
view full answer...Filter Your Search
Contact and Help