Search: dexter 7000 lb brake assembly   >  

Self-adjusting brake assemblies are the way to go like with the #AKEBRK-7-SA which do fit your 7k Dexter axles. The only real reason to go with manual adjust is really just cost. At one point the self adjusting models were much more expensive but…

I can end this debate for you real fast! Trailer tires, which will have an ST in front of the size, should always be inflated to the maximum psi indicated on the tire. Trailer tires usually do not have a recommended and maximum psi indication so I…

Increasing your wheel size one inch is typically not an issue, so you likely will be able to use a wheel like the Aluminum Viking Series Valhalla Trailer Wheel - 13" x 5" - 5 on 4-1/2 - Silver Spoke #AX02350545BMFL you asked from.…

The very end of center cap included with the Aluminum Viking Series Valhalla Trailer Wheel - 13" x 5" - 5 on 4-1/2 - Silver Spoke #AX02350545BMFL you were looking at is removeable without taking the wheel off so you will have no…

Thanks for the picture of your axle sticker. From that I can tell that your 2017 Grand Design Momentum 376TH has 7k axles which is exactly what the HydraStar Disc brake kit part #HSE7K-TR1 was designed to fit so it would work great on your trailer…

The disc brake kit #K2HR712D that you referenced should work well for you. You would need a quantity of 2 of these for each of your axles. These have the same bolt pattern as your current setup and are rated a 7k. You can verify that these will fit…

Since you are exceeding the trailer's gross vehicle weight rating (GVWR), the braking power is surely to be compromised. I would first recommend increasing the gain on your vehicle's brake controller. This will help to increase the braking…

Yes, we do offer the Trailer Hub Assembly part #8-219-13UC3 with the EZ lube grease cap. For that you would want the part #42866UC3-EZ.

Since you are building a trailer I first want to state that using quad axles isn't ideal. It will cause tire scrub as there becomes too broad an axle base for the trailer to track as nicely. That is why most trailers will use tandem or triple…

The higher cost of Dexter electric brakes like the Nev-R-Adjust #23-459 definitely has a lot to do with their name. The name is so recognizable in the industry because they have been around for a very long time, their parts are extremely reliable,…

The correct wheel stud for a Dexter 7K Axle with 1/2" Wheel Studs is the Dexter Wheel Bolt part #7-262 which is cross-compatible with the AL-KO 1530093.

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.