Search: demco lock   >  

The trailer coupler latch repair kits are specific to the trailer coupler and not universal even if the hitch ball size is the same. Therefore, if you have the 12660-97SP, DM13203-52, DM13203-95, DM13205-52, DM13205-95, DM14040-52, DM14040-81,…

Thank you for the photos! It looks like Marvel used to be associated with Atwood and they went out of business a while ago. We have some similar coupler styles but I'm not seeing that any of our repair kits having the same design as your coupler…

While the Air Lift Load Controller II Compressor System #AL25592 can be used with the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs #F2709 on your 2022 Chevrolet Silverado 2500, I recommend against this. The Air Lift compressor system…

According to Lippert they use Lithium Complex grease on their 2k-7k axles. This means you can use a Lithium Complex grease like the LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge #L11390 for your bearings.

Dexter recommends that you check the wires of the brake assemblies of your trailer to determine which magnet would be what you would need. If the wires are white you would need part #BP01-265 and if they are yellow part #BP01-301. However, aside from…

Thanks for that detailed info and there is a cover that will work for you, though the 15 foot length you mentioned is the total length, including the tongue/coupler, and covers are not meant to go over that part of the trailer. I looked up your…

We have exactly what you need to lock the ball mount platform to the shank of your Curt Multi-Ball Adjustable Ball Mount part #D900 and to lock the shank to your hitch. What you would need is the Trailer Hitch Receiver Lock #e98881. You will need to…

Hey Eric, the Demco surge actuator part #DM8609101 that you referenced is a really nice coupler setup that once dropped onto a ball locks to it until you pull the lever up on it to release it. But we also have a lock that would prevent it from…

B&W makes their Biker Bar motorcycle transport systems, such as #BWMC2301, just for hogs but we do have other setups for cruiser and touring motorcycle transport that are general-purpose products. You can see all of these wheel shock products on…

The B&W Tow & Stow 2-Ball Mount - 2.5" Hitch item #BWTS20037B does not have a maximum tongue weight. The 2-5/16" hitch ball has a 18,000 lbs capacity and the 2" hitch ball has a 7,500 lbs capacity. B&W says if you stay…

I have a solution for you, but there is not an adapter that will allow you to mount the B&W Biker Bar #BWMC2301 to an e-track setup on a trailer. The Biker Bar does come with mounting plates/anchors that are mounted on the underside of your…

I took a look at our yoke-style coupler #CA-5210-B and there doesn't seem to be any type of adjustments that can be made for the coupler to sit more snug on the hitch ball. I would check to make sure that your coupler is cleaned out and free from…