Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The Dexter #42865-KIT will work with the Hydrastar #HSE7K-T1SO. These fit 8 on 6-1/2 bolt patterns on idler hubs designed for a 7,000 lb axle. Dexter is typically considered to be the highest quality which is why they usually cost more. The…
view full answer...According to HydraStar, their #HSE7K-T1SO Disk Brake Kit with Actuator will take approximately 4-6 hours to install. This can vary according to how the trailer is equipped and how mechanically inclined the person completing the installation is. If…
view full answer...The Hydrastar Disc Brake kit part #HSE7K-T1SO would be the correct place to start as this is a slip-on style rotor like you are wanting and comes with the best actuator out there. Then for idler hubs that would fit behind these you'd also need…
view full answer...Hey Douglas, you are correct you would need an idler hub to go along with the Hydrastar Disc Brake kit part #HSE7K-TR1SO that you referenced. For that the Dexter idler hub part #42865-KIT would be what you would need as it is the correct capacity,…
view full answer...Hi Charles, While we don't currently offer the inner member that you're needing for the UFP A-70 we do offer a compatible replacement with the Dexter DX7.5L A-60 Brake Actuator #DX33FR. This is the entire actuator assembly along with the…
view full answer...For a longer wheel stud that fits the Trailer Idler Hub Assembly for 7,000-lb Axles #AKIHUB-865-7-2-EZ-K you would want the part #DE53GR. This would give you the additional length needed for your wheel to fit.
view full answer...The difference between the Hydrastar Disc Brake Kits are the rotors they come with. The Kit #HSE7K-T1 comes with integral hub-and-rotor assemblies while the Kit #HSE7K-T1SO uses rotors that will slide onto a Idler Hub #AKIHUB-865-7-2-EZ-K.
view full answer...The Kodiak Disc Brake Kit #K2HR12A11-120DW will use the Kodiak 11" Rotor #KR1110Q which is 11.35" in diameter. Your current rotor only being 10-3/4" will not fit with this kit. The disc brake kit is designed to fit on ALKO 12,000lb…
view full answer...The Kodiak #K2R1258L12 Disc Brake Kit is compatible with a 12K Dexter axle with a 7-bolt brake mounting flange. Your current wheels/hubs should have an 8 on 6-1/2 inch bolt pattern. You'll also need an electric over hydraulic brake actuator, a…
view full answer...Trailer brake actuators like the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout #DX56FR you're looking at are rated more for the brake type and not necessarily a specific amount of axles since it has to do with the amount of pressure the…
view full answer...Hydrastar has a slip-on style version of their 7k disc brake kit with the part #HSE7K-T1SO. You will also need idler hubs too like with the part #AKIHUB-865-7-1-EZ-K but you should note that we don't have any oil-bath idler hubs in this capacity.…
view full answer...The only difference between the HydraStar Disc Brake Kit with Actuator for Tandem Axle Trailers - 7K part #HSE7K-T1SO and part #HSE7K-T1 is that the latter comes with the hub which is integrated into the rotor. The former does not come with a hub and…
view full answer...Related Searches
Filter Your Search
Contact and Help