Result: curt tru track

Hey Paul, I spoke with Curt and they stated that the Replacement Trunnion Spring Bar for Curt TruTrack Weight Distribution System #C17535 would only be compatible with the #C17499. The Curt TruTrack 4P Trailer Mounted Weight Distribution System w/…

The Curt TruTrack Weight Distribution System part #C17500 which is rated for up to 10,000 lbs gross trailer weight and 1,000 lbs tongue weight would work but it wouldn't perform as well as the Curt TruTrack Weight Distribution System part #C17499…

For starters, I would not use the Equal-i-zer Weight Distribution System part #EQ37100ET that you have now as it is rated for a total tongue weight of 600 lbs - 1,000 lbs. The tongue weight of your 1967 Holiday Rambler is likely around 380 lbs - 570…

The Equal-i-zer Weight Distribution System part #EQ37100ET and Blue Ox SwayPro Weight Distribution System part #BXW1000 are both great options. However, in regards to combating trailer sway the edge has to go to the Equal-i-zer because it has true…

The correct Fastway e2 Weight Distribution w/ 2-Point Sway Control for a Lance 1475 Trailer is part #FA94-00-0600 for round or part #FA92-00-0600 for trunnion. The trunnion spring bars are needed for vehicles which sit lower to the ground. The…

As a first step, you'll want to determine the tongue weight of the camper when it's fully loaded as you'd normally tow it. To that figure, add the weight of anything carried in the truck bed that's behind the rear axle. These combined…

The Replacement Spring Bar for Equal-i-zer Weight Distribution Systems #EQ90-02-0699 could potentially work however without knowing what system you currently have I won't be able to say for certain. The easiest way to find out what you need is to…

Hi Rene; I'm sure it's frustrating to have the mirror fall off, and while there are only universal towing mirrors for your 2016 Nissan Frontier, there are better ones than the clamp-on (which I also do not like). I would definitely go with…

There are two different versions of the Furrion Vision S Wireless RV Backup Camera System, the old system part FOS48TA and the new system part FOS43TA. If you have the old system then the only option to add more cameras would be to purchase a new…

Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part #C40034 that you referenced. The general rule is for a 3/4" shank tighten to 150 ft/lbs For a 1" shank…

The difference between the Curt TruTrack #C17501 and #C17499 are their weight capacities and the #C17501 comes with a 2-5/16" hitch ball already installed, whereas the #C17499 would require you to purchase one and torque it down yourself. The…

To replace either of the hitch balls that come with the Curt Deep Drop Adjustable 2-Ball Mount #C49NR you need the Curt Dual Ball Attachment #C69NR. The individual hitch balls aren't replaceable so you have the get the platform piece, but you…