Search: curt shockdrop   >  

Hi Leon, Yep, you can use the Curt CrossWing Lightweight 5th Wheel Trailer Hitch #C86JR on your Ram 2500 for your Rockwood 5th wheel trailer. It will attach right to your truck's above-bed base rails and has a 20,000 lb capacity, which is well…

Yes, you can! Since your 2006 Ford F-150 came with a 7-way connector from the factory you'll be able to install the Redarc Tow-Pro Liberty Brake Controller item #RED96CR with the custom harness that comes included. This the same brake controller…

If you are wanting something light weight then the Curt CrossWing Lightweight 5th Wheel Trailer Hitch item #C86JR is the right hitch for you. The CrossWing weighs in at 87 lbs. The main concern with using the CrossWing on your 2021 Ram 2500 is that…

The Demco Recon #DM8550043 and Curt CrossWing #C86JR have quite a few differences that separate the two similar designs. The Recon has an extra 1,000lbs of capacity and comes with a 15-1/2", 17-1/4", or 18" height setting. The…

You'll need a wedge, but the Turning Point pin box is compatible with the Curt CrossWing Lightweight 5th Wheel Trailer Hitch #C86JR. What you'll need is the Wedge for Curt CrossWing 5th Wheel Trailer Hitch #C85DR. This will bolt onto the…

Hello again Joe; the etrailer RV Cover for Travel Trailers #e97VV does have zippers to allow access with the cover on which can be seen in the video attached below. This will work as long as you measured correctly. You need to measure the body of the…

Hey James, The correct rear camper tie-downs to go along with your new TorkLift SuperHitch Original Trailer Hitch Receiver #TLD1102 are going to be part #TLR3505. These will mount directly to the hitch at the end of the crosstube.

The Curt Crosswing fifth wheel hitch part #C92DR does offer an offset built into it of 9 inches to help with turning clearance for short bed truck...BUT most modern fifth wheel trailers have tapered noses which are designed for short bed clearance so…

We have 2-1/2 inch shanks that will work with a Reese Strait-Line weight distribution system such as #RP66074 but you did not mention the length you had so I'll give you a couple of options for shanks that fit 2-1/2 inch hitches and you can…

The Curt RockerBall Anti-Rattle Towing Kit #C43KR takes the additional height of the base of the RockerBall into account for the listed 4" rise and 5" drop. I have attached an image below showing how it is measured. Typically, you find the…

Hey Dave, thanks for reaching out! The panels for the etrailer Hard Tonneau Cover #e73DR are about 21" wide, and when folded up in your 2024 Ford F-350 Super Duty they will take up about 2' when you include the other parts of the cover.

Hey Doug, That's a good question because fit is really important so the cover stays snug on your trailer, and there is a specific way to measure for the etrailer covers. It's pretty simple, and what you want to do is measure the body of the…