Search: curt fifth wheel hitch   >  

Hey Jay. It sounds like you are on the right track here because a sidewinder pin box will be your only option for pulling your 5th wheel since you have a short bed truck with the Rambox. That said, you are right that the Reese Sidewinder cannot be…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

No, the Lippert 1621 will not have any issues with an 8' truck bed. The trailer will just sit a little further back. I spoke to my contact at Lippert and they stated that the general rule of thumb for a truck with an 8' bed would be to use a…

The Lippert 1621 pin box #LC1191191 is 12-3/4 inches wide and has a measurement of 3-3/8 inch from the leading edge of the pin box to the front of the king pin. From the leading edge to the back of the pin box the measurement is 8-7/8 inches. This…

Thanks for the photo! I had Lippert run the serial number from the photo, and was told that you have a Lippert 1621 pin box. The compatible Curt Flex Air cushioned pin box is part #LC328492 for an 18K or #LC369535 for a 21K capacity. However, the…

Hey Mark, since we know your Brinkley Z3100 has the Rhino style pin box, the correct Gen-Y fifth wheel to gooseneck adapter is the part #GY98GR which comes with the auto latch you mentioned wanting as well!

Hey Matt, so the correct Reese Goose Box you'd need for your 2024 Jayco Eagle 29DDB would be the part #RP85FR which fits the Rhino as well as the other standard Lippert pin boxes that your Jayco would have came with although we are pretty sure it…

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

The B&W Companion OEM 5th-Wheel Hitch for Ford Super Duty Prep Package - Dual Jaw - 20,000 lbs #BWRVK3300 is a confirmed fit for your 2017 Ford F-350 with factory rail kit for 5th wheel. This hitch weighs just under 150 lbs. It does come in…

The Curt A-Series line is the premium version over the Q-Series line and comes with a few differences. One major difference being the jaw design for the A-Series, which overlaps itself instead of just butting up to itself like the Q-Series does. This…

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

The width of the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box - Lippert 1621 and 1621 HD - 18,000 lbs - 3.5K TW #325-GH-8040 is 12". The best way to determine if that will be a fit to replace your current pin box on your 2020 Sandpiper is to…