Result: curt adjustable hitch

Great questions! The Curt Echo Wireless Trailer Brake Controller #C51180 will operate using the settings that you chose in the iPhone app regardless of whether you have the app pulled up or not so you can jump from one app to the next or even turn…

I definitely understand how safety chain capacities and determining exactly what chain rating you need for your trailer can be a bit confusing. To keep it as simple as possible, safety chain requirements state that the breaking strength of EACH…

From what I have found, the ALKO hub and drum assembly you have is for 7,000 lb axles. I believe the Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 12" - 8 on 6-1/2 #8-219-4UC3 will work as a replacement. This has the same…

Yes, your Hayes/AL-KO 12,000 lb axle with a #120 spindle is absolutely compatible with the brake kit you mentioned, the Kodiak Disc Brake Kit #K2HR12A11-120DW. This kit does require you get the bearings and seal separately, but comes with the races…

I attached a picture that has a chart with all of the error codes for the Prodigy P2 part #90885 that you referenced. I am not sure what you mean by dashes on the display so hopefully the chart helps you. Feel free to email back with pictures of the…

According to the installation instructions, the torque specification for the 2-5/16" ball that comes with the Blue Ox 2-Point Weight Distribution w/ Sway Control - 6-Hole Shank - 10K GTW, 1.2K TW item #BLU75FR is 260 ft lbs. The socket you will…

Thanks for your recent purchase! The Blue Ox weight distribution system #BXW1001 that you purchased will require drilling. The tools you will need are as follows: Torque wrench, drill, large vise grips, tape measure, 1/2 inch drill bit 3/4 socket and…

The LED Combination Trailer Tail Light #STL14RB includes two 1/4"-20 coarse thread nuts and bolts. The useable thread length is 13/16" long.

The Curt Pintle Hook with 2-5/16" Ball - 2-1/2" Hitches - 20,000 lbs #C45908 can be latched and locked in the up position to allow you to use a standard coupler with the hitch ball. I've attached a video to assist.

The hub/drum you sent in a picture of is a Lippert 8,000 lb axle hub with an 8 on 6-1/2 inch bolt pattern designed for oil-bath applications. The correct replacement then is the #8-285-10UC3-A.

I would love to help but I can't really tell you if you need the B&W Tow & Stow 2-Ball Mount with 5" Drop part #BWTS20037B (part #BWTS20037C) or 7" Drop part #BWTS20040B (part #BWTS20040C) as it varies by application so you will…

Yes, the replacement lid for the #20099 breakaway kit, part #20106, does include the charging circuit board, attached to the inner side of the lid. You can view an image of the circuit board at the link below.