Result: complete roof systems roof rack

Hey Cathy, sweet camper! I really like the Rhino-Rack Aero Bar Roof Rack for Camper Shells #Y02-500B-ST you were looking at because it's a tried-and-true solution that also gives you tracks so you can accommodate a variety of different load…

Hey Arthur, so the difference is the length of the mounting bolts that come with the two kits. The part #Y02-500B comes with bolts that are 1-3/8 inches and #Y02-500B-ST comes with bolts that are 2 inches long.

Yes, you can use the Roof Rack Adapters item #TH490001 to attach the Thule HideAway Awning for Sprinter item #TH64WJ to an aftermarket roof rack. The only two major restrictions are the crossbars need to have a 36" spread and they can not be…

I have attached for you below the installation instructions for the Thule HideAway Awning Adapter for Mercedes Sprinter with OE Track part #TH301668.

Trailer hitches as well as adapters have some tolerances that means they may not be exact in regards to the opening being 2 inches or an adapter being fully 2 inches such as you may be seeing with the Curt Trailer Hitch Receiver #C13392. So what you…

Hey there Stormy, I think we can figure this out, as there are a quite a few options. First, let's just discount the heavy-duty rack, as those are just oddly shaped crossbars and there's nothing HD about them (like you mentioned, they have…

You can either cut down the 63" long tracks that come with the Rhino-Rack Aero Bar Roof Rack for Camper Shells #Y02-480B to fit your 2008 Toyota Tacoma OR you can purchase the 47-1/4" long Rhino-Rack Tracks #RTC12JW and get the 54"…

If you were to measure the width of the track that would then give you the best chance of identifying it. However, this really is not needed because the slots are pretty much universal so you can mix and max brands. The most cost effective system we…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

We do have exactly what you need for a roof vent for your camper, so long as it has the standard 14" x 14" square cut out. What you'll need is a 12 volt vent from Ventline, which comes included with a dog-proof wall mounted control…

While the MaxxFan vent assemblies #MA00-06401K and #MA00-07500K are not made in the USA, the Ventline and Fantastic Vent assemblies are. The Fan-Tastic Roof Vent #FV802250 (manual lift) and #FV807350 (powered lift) are both 14 x 14 inches and tinted…