Result: ce23003

Hi Leo; I would start by checking to see if there are axle tags on the axles. They will probably have the capacity on them or at least a serial number the axle manufacturer could use to identify the axle. If the trailer manufacturer is still in…

For a 6K axle you can use the CE Smith U-Bolt Kit for Mounting 5.2K to 7K, Round Trailer Axles #CE23003. We don't currently offer a four leaf trailer leaf spring with a 6K capacity and 26" eye-to-eye measurement, but we do offer the 6-Leaf…

It really just depends on what you are looking to get out of the bushings. Bronze bushings, like part #K71-291-00, will last longer but are more noisy and it is recommended to use wet bolts like part #126B2 to keep them lubricated. Nylon bushings,…

It looks like Trailer Hub and Drum Assembly - 5,200-lb Axles - 6 on 5-1/2 Item #8-201-5UC3 could be the right replacement for you. You can check the bearing numbers if you still have the bearings. If they are 25580 for the inner and LM67048 then this…

Installing a 4,000 lb capacity leaf spring on a trailer with a 3,500 lb capacity axle will make the suspension stiffer which could then in turn minimize the risk of the axle contacting the frame. However, this is not what I recommend to fix your…

I am happy to get your Montana 5th Wheel Trailer all set up with new suspension components. When picking out replacement leaf springs, it is important to keep in mind that older springs will have stretched out a bit from their original length. This…

The etrailer leaf spring part #e27SR is the correct capacity and length to work on your 2020 Grand Design Reflection 240RL. It having a couple more leaf's would not be an issue at all either. Since the height would be slightly different you would…

Yes, The Dexter #DX74XR will work as a direct replacement for the Dexter 072-100-01 you were looking at. These are the same length, capacity, spring count, and both use bronze bushings. It looks like the Dexter 072-100-00 uses a weird rubber bushing…

It appears that your u-bolt plate on your 2021 Grand Design Reflection 31MB, will work with the SumoSprings Trailer Helper Springs #SS26MV. The plate itself including the bends does not appear to be larger than 3/4" nor does the width appear to…

Hi Chad! There are 2 ways to tell the difference between driver side and passenger side Dexter Axle brake assemblies; the first is by looking at the sticker on the inside, and the second is by looking at the brake assemblies as a whole. For example,…

The SumoSprings Trailer Helper Springs #SS33HR are only designed to fit 1-3/4" wide leaf springs. You might consider the Timbren #T92MR which mounts under the U-Bolts and will work with your 2" wide springs.

The best way to measure a trailer spring for purposes of selecting a replacement is to remove it completely from the suspension. It is also important to note that leaf springs will tend to elongate over time as they wear. You might pull a well-worn…