Search: c21504   >  

Hey Steve, thanks for reaching out! Here are the weights of the different hitches that fit your 2024 Hyundai Tucson: - EcoHitch #EH98SR - 40 lbs - Curt #C94WR - 31 lbs - Draw-Tite #DT22MR - 36.5 lbs - etrailer #e38KR - 31 lbs I personally like the…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I recommend the etrailer.com Trailer Hitch Receiver part #e98853 for the 2020 Toyota Sienna because of it's concealed cross tube design. The only portion of the hitch that is visible once installed is the receiver square which sticks through the…

For a truck bed extender with a bar wide enough to carry and haul something that is 38 inches wide you could use the Flint Hill Goods Truck Bed Extender - 2" Hitches #FHG89ZR which has a load bar that extends up to 48 inches wide.

Installation of the etrailer Class 3 Hitch #e23ZR is actually going to be fairly easy as far as hitch installation goes. You will just lift the hitch into position and install bolts into existing weldnuts on the driver and passenger side frame rail.…

You are correct that both the Curt #C94WR and Draw-Tite #DT22MR you were looking at for your 2022 Hyundai Tuscon are very similar. Both hitches share the same 525lb tongue weight and 3,500lb trailer weight ratings, both share the same hidden…

Yes, both the Draw-Tite Max-Frame Trailer Hitch Receiver part #DT22MR and Curt Trailer Hitch Receiver part #C94WR are fits for a 2023 Kia Sportage PHEV per the respective manufactures. They are also both great options for this vehicle. The main…

While Draw-Tite has confirmed that the Max-Frame Trailer Hitch Receiver #DT22MR will fit your 2023 Kia Sportage we have not had one in to install in our facility for images. I reached out to Draw-Tite and they confirmed that there is no additional…

Yes, you are correct. The Curt Trailer Hitch item #C13397 is the correct hitch for the 2023 Honda CR-V Hybrid. The wiring harness is going to depend on whether or not your CR-V is front wheel drive or all wheel drive. I have listed both options…

If you take a look at the accompanying photo, which was sent in by a customer, you can see the part that needs to be removed when installing a trailer hitch like the Draw-Tite #76138 (which has a 2" receiver) on your 2018 Mazda CX-5 GT. This is…

The Sherpa 2.0, part #SH22G, and the NV 2.0 Base, part #BA22B, are the 2 inch models that fit a Class III hitch with no adapter. Also, they do both includes locks for the rack to the hitch and for the bikes to the rack. One difference is that the NV…

The distance from the center of the #DTSTBM6600-2S hitch pin hole to the center of the anti-rattle pin on top of the shank is 3-1/2".